26mm Rings for Brno & CZ

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/3221043/m/234106821

13 April 2004, 09:26

375HH

26mm Rings for Brno & CZ

Where can I find 26mm rings for my Brno M21?
Lynx and Bsqare do not make them any more.
/Johan

13 April 2004, 10:22

GBF

EAW and Talley make them. EAW are quite expensive though, 309 Euro from Frankonia.

Regards

13 April 2004, 11:02

tiggertate

Talley no longer makes them. You can find Leupolds in some styles. If you have a thicker 1" you can line bore them out to 26MM (about 1.02).

17 April 2004, 06:05

<eldeguello>

I "made" a pair of 26mm rings for a Ruger No. 1. I just used Ruger 1" rings, a piece of emery cloth, and a large wooden dowel to back it with. Just kept "cutting & trying" until the rings fit with just a little space showing between the flats where the halves meet. Worked O.K.! I believe there's enough material in the pair of medium-height CZ 527 rings I just bought to permit the same treatment.

There's only 0.02362" difference between a 26mm hole and a 1" hole! Just enough to prevent you from using 1" rings, dammit!!