THE ACCURATERELOADING.COM MEDIUM BORE RIFLE FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Re: Nosler Solid base bullet question

Moderators: Paul H
Go
New
Find
Notify
Tools
Reply
  
Re: Nosler Solid base bullet question
 Login/Join
 
one of us
Picture of RSY
posted
Paul:

Here's something for your edification: http://www.benchrest.com/forums/archive/index.php/t-9589.html

I hope it'll explain my statement, somewhat. If you have the newest Nosler manual (No. 5), you can see some Zipedos on the back cover. You'll see that, unlike the Solid Base/BallTip design, the Zipedos were flat-based and not boattails. Also, they were sub-caliber and had a series of grooves and bands to engage the rifling.

RSY
 
Posts: 785 | Location: Central Texas | Registered: 01 October 2001Reply With Quote
<eldeguello>
posted
Quote:

So, they are basically a cup and core bullet? The Nosler website didn't list them, must be something special just for Federal.


Well, they are "cup and core", but NOT TYPICAL ones. They have a heavy, solid base and the base of the core is not boattail shaped, so they are not prone to separation in the same way other cup & core boattail bullets are. In addition, the core cavity has heavily tapering walls which support the mushroom and limit its expansion, so they are definitely controlled-expansion bullets despite not having a bonded core. I tried the120-grain 7mm ones on small Central Texas whitretails, and found them to be too destructive - from a 7X57mm at 3100 FPS. Went back to 140-grain bullets in this application.
 
Reply With Quote
one of us
posted Hide Post
Quote:

So, they are basically a cup and core bullet?





Yes. And they, at least the old ones, worked very well on deer. In fact I recall Nosler advertising them as "the perfect deer bullet". I used them in 243, 257, 264, 270 and 280. I, too, was disappointed when Nosler discontinued them.

WRT terminal ballistics, I'd rate them very close to Speer Hot Cores and Hornady Interlocks.
 
Posts: 1416 | Location: Texas | Registered: 02 May 2003Reply With Quote
one of us
Picture of Fritz Kraut
posted Hide Post
I really like this quotation in RSY's signature: "The real work of men was hunting meat. The invention of agriculture was a giant step in the wrong direction, leading to serfdom, cities, and empire. From a race of hunters, artists, warriors, and tamers of horses, we degraded ourselves to what we are now: clerks, functionaries, laborers, entertainers, processors of information. - Edward Abbey"

So it is.

Fritz
 
Posts: 846 | Location: Sweden | Registered: 19 April 2001Reply With Quote
one of us
Picture of Reloader
posted Hide Post
RSY and Rooster,

Ya'll were right they definitely have the solid base too. I could have sworn they didn't but, oh well, we're all wrong now and then.

Good Luck!

Reloader
 
Posts: 4146 | Location: North Louisiana | Registered: 18 February 2004Reply With Quote
one of us
Picture of RSY
posted Hide Post
 
Posts: 785 | Location: Central Texas | Registered: 01 October 2001Reply With Quote
one of us
Picture of RSY
posted Hide Post
Reloader:

Maybe you were thinking of their match bullet. It, indeed, does not have the solid base. It's enclosed, but not solid.

Have a good weekend, everyone!

RSY
 
Posts: 785 | Location: Central Texas | Registered: 01 October 2001Reply With Quote
new member
posted Hide Post
Nosler has brought the solid base back,try www.shootersproshop.com Look under factory seconds.
 
Posts: 2 | Location: Hudson,Co. | Registered: 12 March 2003Reply With Quote
one of us
Picture of Idared
posted Hide Post
I too prefer the solid base over the ballistic tip most of the time. I have used an awful lot of 130 grain 270s and 150 grain 284s over the years for everything up to elk. I know several people who use to use the 180 grain 308s for elk and got by very well. If one takes a look at the cut-away on the link provided above for Nosler seconds and it is obvious why they were refered to as Solid Bases. I have scrounged and hoarded them ever since they quit making them. They still remain my bullet of choice if I am not using Partitions.
 
Posts: 845 | Location: Central Washington State | Registered: 12 February 2001Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Rifles  Hop To Forums  Medium Bore Rifles    Re: Nosler Solid base bullet question

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia