Well I use the SR 20 and beautifully built accurate (clover leafs 3 rws 100g in 243 if i do my bit) rifle. And am sure the same can be said for their newer turnbolt sr21 or straight pull sr30. If it fits then go for it.
Posts: 988 | Location: Scotland | Registered: 28 February 2011
I had an SR30 in 35 Whelen. It was the carbine model with an American style walnut stock. It was and is the fastest bolt action rifle I have ever seen,period. It had ERA irons on it. Rear was a flat top pyramid shape with a green flourescent rod up the center. The front was a banded ramp with a red flourescent bead. Just put the red dot on top of the green 'I' . Super accurate with most factory ammo. Only one small flaw. It kicked worse than any rifle I have ever shot and I quite regularly shoot a 416 Rigby And have no trouble with 100 rnds of 375H&H in a day. It was just miserable. It's gone. Beautifully made. Craftsmanship was outstanding. Would like to have another in a lesser caliber like a 7x57. Neatest safety ever. The bolt locking via ball bearings as on hydraulic push fittings is solid. Reccomend it highly.
SCI Life Member NRA Patron Life Member DRSS
Posts: 2786 | Location: Green Valley,Az | Registered: 04 January 2005
Thanks for the input, this action really intrigues me. I understand that it was designed by Peter Fortner, who also designed the straight pull fortner action used in the Anschutz biathlon rifles. It has been tested by the proof house in Suhl to 112,000 psi, and by another test lab to 155,000 psi. I am amazed how strong the collet style locking is.
I think I will start saving now and hopefully will buy one in the fall. It is interesting that you say it kicked so fiercely in 35 Whelen. I'm sticking with the 6.5x55 as it will be used mostly for deer and maybe some coyotes, so recoil won't be an issue.
It's not the caliber of the rifle that matters - It's the caliber of the man behind it.
Don't overlook the SR20 if you find a good second hand one and on a budget. Not a straight pull like the SR30, but it is a beutifully made and smooth action and on occasion I have needed a second shot it is there very quickly. I did speak to Heym a couple of years ago - they still had one left handed SR20 action on the shelf, and like a fool I didn't snap it up. When I finally got my act togeher it had gone. The chap at Heym reconded these older action were even better than current models.
Posts: 988 | Location: Scotland | Registered: 28 February 2011
And as to the kickiness - thats will be down to stock shape - they do a"classic" which is the straight american style which recoils straight back, or a Germanic style hogs back with lots of drop at the shoulder which will kick upwards and hurt. Also check that the stock is long enough for you - mine in 243 is quite short for me, which is fine for a 243, but if it was any bigger a claibre, I would want to add another 1inch to it.
Posts: 988 | Location: Scotland | Registered: 28 February 2011
Nice looking rifle. Does the bolt lock up like a Blaser? Where (in the USA) do you get these? Peter.
Be without fear in the face of your enemies. Be brave and upright, that God may love thee. Speak the truth always, even if it leads to your death. Safeguard the helpless and do no wrong;