Go | New | Find | Notify | Tools | Reply |
One of Us |
Does anyone have a pic of a barrel caliber stamp by JES after changing the old caliber to the new caliber by this company? Thanks in advance! | ||
|
Moderator |
You might ask in the gunsmith forum opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
I have seen a post of a picture where the old was C’s out and new put beside it but can’t remember which forum it was on. When he did an 8x57mm to 9.3x62mm for me he didn’t mark it at all since my intention was to have it milled out and stamped there. | |||
|
One of Us |
I told them to not mark it; I had one rebored about 6 months ago. I don't know how they do it but I know how I do. And yes this belongs in gunsmithing; nothing to do with bore size. | |||
|
One of Us |
Thanks for the info guys! And, mods feel free to move this over to gunsmithing. Hopefully, someone will have a pic of a new caliber stamp on their rebore. The reason for my inclusion in the medium bore subforum I guess, was that I was thinking of reboring to make another 338-06 and also a 358 Norma. But the gunsmithing subforum is a better idea! | |||
|
one of us |
Stolen from another site: Aut vincere aut mori | |||
|
One of Us |
For me, when they even use the term "stamp"; I would run the other way. You want it engraved, not stamped. Or rolled is good but the dies cost $300 each. | |||
|
one of us |
I have had JES rebore two rifles for me, neither one came back with any new caliber mark at all. They both shoot great, but I thought they really should be marked somehow, or a discussion of marking should have happened (I accept responsibility on the second non-marking because I knew the first one didn't get marked). | |||
|
One of Us |
For sure. That could be quite a danger as the rifle moves on to new ownership. | |||
|
one of us |
Probably optional as some custom gun builders and customers like to do that themselves..I see it as an option and a service to those down the line that might come in possession of the gun. Ray Atkinson Atkinson Hunting Adventures 10 Ward Lane, Filer, Idaho, 83328 208-731-4120 rayatkinsonhunting@gmail.com | |||
|
new member |
JES rebored a 30/06 to 9.3x62 for me a couple of months ago, xxxx out the old caliber and stamped it 9.3x62 . It looked fine to me. | |||
|
One of Us |
z1r, Thanks for the pic! 340, Thanks for the info on your 30-06 to 9.3 conversion. And a big thank you for everyone else's comments & suggestions. | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia