The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Hunting Handgun Hunting Handguns I Wish The Factory MadeGo | New | Find | Notify | Tools | Reply | |
| Handguns I Wish The Factory Made | Login/Join |
| One of Us |
Ruger Bisley Blackhawk five-shot 480 Ruger in blue or stainless. Titanium Ruger Bearcat 22 LR/Magnum convertible. Titanium Ruger SP101. | ||
|
Moderator |
Definitely would like the Bisley in .480 Ruger......they would have sold like hot cakes IMHO. "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
| One of Us |
I'd like a 5 shot SRH in .480 with a 5" barrel. | |||
|
| One of Us |
X frame w. a shortened cylinder/window in the frame, to hold 500 Specials... Even better if it could be done on a scandium frame... And for the support of this Declaration, with a firm reliance on the protection of divine Providence, we mutually pledge to each other our Lives, our Fortunes and our sacred Honor. | |||
|
One of Us |
I'd like this configuration with a fixed rear sight, easily replacable front sight and a bead blasted finish. I even sent a suggestion to Ruger to make a model called a "Grey Hawk".  | |||
|
| One of Us |
An affordable reproduction of the Stevens tip-up single-shot in 22 LR. A companion long gun could be a remake of their Bicycle Rifle with a fixed buttstock and a 16 inch barrel that is easily detached or folds 180 degrees or so. http://nikolasschiller.com/ima...icycle_rifle_yes.jpg A Pedersoli Howdah with 12 bore rifled barrels. A single-action self-loading 50 GI single-stack set up so that depressing a spring-loaded thumb safety activates a guide rod laser and a weapon-mounted light (which is integrated into a slim polymer frame). | |||
|
one of us |
Ruger Bisleys chambered in 44 Mag, 45 Colt, 41 Mag, and 480 Ruger with 5.5" bbls and banded front sights! BH1 There are no flies on 6.5s! | |||
|
| One of Us |
A small frame, ultralight, 4" barrel, .22 lr, DA revolver with adjustable sights. A mid size .44 special SA revolver, 4 5/8" barrel, high quality, accurate, adjustable sights.... wait.... Ruger made up a few for Lipsey's and I have one! | |||
|
One of Us |
Ruger Bisley Hunter in 5 shot 480 Ruger. NRA Benefactor Member USAF Ret. | |||
|
| one of us |
ruger/ bisley 480, montado 44 special, 5 shot 44 mag on the small frame. smith/ a frame size inbetween the x and the n in 480 and 50 special, a L frame in 41 special. | |||
|
one of us |
I would buy one of them also.. If you're going to make a hole, make it a big one. ΜΟΛΩΝ ΛΑΒΕ Member of the Delaware Destroyers Member Reeders Misfits NRA Life Member ENDOWMENT MEMBER NAHC Life Member DSA Life Member | |||
|
One of Us |
Why Ruger won't make a 5 shot version of ANY caliber in Blackhawk or Super Blackhawk or Bisley is beyond me. I assume it is a liability issue. Obviously this would be my preference, rather than having to send off the gun to have a smith make the cylinder. Most people are bothered by those portions of Scripture they do not understand, it is the passages I do understand that bother me. (Twain) | |||
|
| One of Us |
Stainless steel 32 mag Bisley with a 5.5 inch barrel and adjustable sights. | |||
|
| One of Us |
+1, and ensure no muzzle brake.... John | |||
|
Moderator |
sw n frame, 5 shot 475 ruger, or 45 lc, but designed for higher pressure, 4" barrel, a LITTLE heavier than the mountain gun, brass sights, taylor throated, 2$ single action trigger, 7# double, "vapor polished" interals, x500 grips, bedded to gun, in a cross draw holster, stainless steel. or same in shortened xframe light weight or same in super redhawk, light weight LOL, i guess i should come out with the 458 JLC (jeffe long colt) that shoot .458 bullets, made from shortened 45/70 brass? opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| Moderator |
I have a taurus 94 4" ss being refitted with a shilen 1:10 twist barrel for shooting SSS bullets .. i HOPE to have it back soon. its, in my mind, the best trailgun possible opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| Moderator |
Jeffe -- keep in mind that only 2,000 psi separates the .480 Ruger from the .475 Linebaugh. Neither require a lot of pressure to work well. And you don't want the weight down to low in these things as they will kick the snot out of the shooter!  "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
| One of Us |
Somehow I remember the 475 linebaugh being in the 50kCUP range. Hardly a low pressure round. The 500 linebaugh was around the 30kCUP range. The 454 was listed at an astronomical 60kPSI. John | |||
|
| Moderator |
Marco I was more concerned about cylinder length  me, it would be 400gr bullets at 1000 fps, 4" barrel, and lets GOforgot to mention, stainless -- Jphn, 60kpsi is more or less 51-52k cup (there's no DIRECT relationship, due to copper's properties) .. or about the same as the 475 or 454, either way, I wouldn't load it up to crazy, and iirc, the ruger is loaded to lesser pressure opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
Not sure on the Conversion, but I seem to remember 60kPSI being around 54kCup, which is astronomically high for a handgun. Even the 50kCup is up there!!! I would agree that with the 454 and 475 linebaugh there isn't much on earth that requires full power loads, and it is much easier on the wrists. John | |||
|
| Moderator |
So, I just registered the .458 LC with ammoguide. I'll cut down some 45/70 brass, just to test, and run some loads through my 45/70 handirifle. This could be interesting. I am putting a ceiling of 28K .. Anyone got a blank cylinder for a 625? opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
One of Us |
I wish Ruger would reintroduce the Single Six with a Bisley grip. I missed out on getting one. Gpopper | |||
|
| Moderator |
Jeffe, how long will the case be? "Ignorance you can correct, you can't fix stupid." JWP If stupidity hurt, a lot of people would be walking around screaming. Semper Fidelis "Building Carpal Tunnel one round at a time" | |||
|
| Moderator |
tenatively, 1.11, oal 1.6 ... depends on how the rem 405 works out for OAL .. want it to fit an N frame, 28K psi neat things happen when i am both bored and energized! opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| Moderator |
too long on shortest OAL .. need to rethink it .. and wonder "wow, is it REALLY any better than a 454? opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Hunting Handgun Hunting Handguns I Wish The Factory Made
Visit our on-line store for AR Memorabilia