THE ACCURATERELOADING.COM HANDGUN HUNTING FORUM

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Hunting  Hop To Forums  Handgun Hunting    Tapping TC barrels for scope mounts

Moderators: MS Hitman
Go
New
Find
Notify
Tools
Reply
  
Tapping TC barrels for scope mounts
 Login/Join
 
one of us
posted
I assume the answer to my question is yes. Do you need to drill and tap extra screw holes in TC pistol barrels when mounting a scope on a hard kicker like a 44 mag? If so, do you need one or two more holes?
I am going to use a Weaver style mount on a 44 SS bull barrel.
I have a scope on my 22 Hornet barrel but all I did there was use the holes under the rear sight and it works fine.
I'm thinking of buying a 4x Burris to go on it.
Any other suggestions about mounting the scope?
Thanks
 
Posts: 633 | Registered: 11 March 2001Reply With Quote
<Paul Dustin>
posted
No you do not extra holes. But I would check to see how far the screw go into your barrel on my 45/70 I had to counter bore the base about .010 to .015 to get the screws down more then 3 threads in to the barrel and put loc-tite under the base. this will hole your scope on. I learned the hard way with a scope in the head.
 
Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Hunting  Hop To Forums  Handgun Hunting    Tapping TC barrels for scope mounts

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia