THE ACCURATERELOADING.COM HANDGUN HUNTING FORUM


Moderators: MS Hitman
Go
New
Find
Notify
Tools
Reply
  
Tracker woes solved
 Login/Join
 
one of us
posted
Well today the Tracker was flawless. I loaded 210 grain cast swc over 12.5 grains of Blue Dot. No locking up and the gun was clean. Yes there was leading but I expected that.
Now I am happy. I really like the Tracker and hoped the locking up was from the dirty loads. Now a question as to what bullets to try. Hornaday xtps shoot well but are costly. The lead swc shoot o.k. also and are cheap. Whats best for hunting?
 
Posts: 622 | Location: PA. U.S.A. | Registered: 12 May 2002Reply With Quote
one of us
posted Hide Post
Hi Don,

FYI, Midway has XTPs on sale for $11.??. There is also a post in the classifed forum. Someone has three boxes at $8.00 per box. Either the Hornady or the cast will work well for hunting. I am trying a 230gr Keith type cast from Drycreek Bullet Works. It looks very promising (bullet quality is excellent). One drawback is the Tracker cylinder is a little short so the bullets are .030 too long when crimped in the crimping groove. I am going to shorten a selection of my cases to accommodate the bullets. They should be one of the best hunting bullets around.
 
Posts: 172 | Location: Danville, VA, USA | Registered: 08 October 2001Reply With Quote
one of us
Picture of Sean VHA #60013
posted Hide Post
Does anyone know if Federal's 250grn Cast Core load will fit into the short Tracker cylinder? This would really effect several of the folks around here who are thinking of a Tracker purchase, but who are holding out a bit as not much is known about them.
 
Posts: 830 | Location: Virginia, USA | Registered: 08 March 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia