Help. ok I am loading 9mm with a 147 tmj bullet and 3.0 Bullseye power for a rifle. Do you think that I will have a problem with this load??? or is there a better one.

You didn't give the maker on the bullet you are using. Alliant shows 4.2g of Bullseye behind a 147g XTP in Win. cases and a WSP Primer (listing at 1010 fps from a 4" bbl. / o.a.l. 1.140").

Scout Master 54

One way to develop a starting load is to take the max load with out damage to the gun or brass, and the minimum load without the bullet getting stuck n the barrel, and average the two.

Because I have been shooting 11 gr. of Power Pistol [formerly known as Bullseye 84] with 158 gr. in a 9x19mm, I suspect that the 3.0 gr. of Bullseye is closer to the bottom than the top.

Recommended loading?

Bullseye From 4.1 grains to 4.2 grains
CCI-500 Primer