THE ACCURATERELOADING.COM FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    Redding neck sizer shaving brass of the neck. Why?

Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Redding neck sizer shaving brass of the neck. Why?
 Login/Join
 
<slancey>
posted
I'm neck sizing my Nosler 22-250 brass with a Redding S-Type bushing neck sizer. The fired neck measures .255" and the bushing is a .250" diameter. Each time a case is sized there are small shavings of brass coming of the case.
Am I doing something wrong?
Anybody ever experience this?
 
Reply With Quote
Ol` Joe
one of us
Picture of Ol` Joe
posted Hide Post
Is the bushing in right? I don`t own a S die but would think there must be a top and bottom to the buttons used. I`d see if one side of the button is chamfered/rounded to prevend scraping the case.


------------------------------------
The trouble with the Internet is that it's replacing masturbation as a leisure activity. ~Patrick Murray


"Why shouldn`t truth be stranger then fiction?
Fiction after all has to make sense." (Samual Clemens)

"Saepe errans, numquam dubitans --Frequently in error, never in doubt".



 
Posts: 2535 | Location: Michigan | Registered: 20 January 2001Reply With Quote
MarkL
One of Us
posted Hide Post
Call Redding.
 
Posts: 88 | Registered: 21 January 2005Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    Redding neck sizer shaving brass of the neck. Why?

Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia