Redding neck sizer shaving brass of the neck. Why?

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/973107293

27 December 2005, 03:56

<slancey>

Redding neck sizer shaving brass of the neck. Why?

I'm neck sizing my Nosler 22-250 brass with a Redding S-Type bushing neck sizer. The fired neck measures .255" and the bushing is a .250" diameter. Each time a case is sized there are small shavings of brass coming of the case.
Am I doing something wrong?
Anybody ever experience this?

27 December 2005, 04:01

Ol` Joe

Is the bushing in right? I don`t own a S die but would think there must be a top and bottom to the buttons used. I`d see if one side of the button is chamfered/rounded to prevend scraping the case.

------------------------------------
The trouble with the Internet is that it's replacing masturbation as a leisure activity. ~Patrick Murray

"Why shouldn`t truth be stranger then fiction?
Fiction after all has to make sense." (Samual Clemens)

"Saepe errans, numquam dubitans --Frequently in error, never in doubt".

27 December 2005, 09:38

MarkL

Call Redding.