THE ACCURATERELOADING.COM FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    What powder do you like with 165 Rainiers in 40 S&W

Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
What powder do you like with 165 Rainiers in 40 S&W
 Login/Join
 
new member
posted
I picked up some 165 grn HP Rainiers recently, and was wondering what powders you out there in reloading land like to use with this bullet/weight? I will be loading in a Glock 27.

I want to use the loads strictly for target (informal) and plinking, somewhere in the 900-1000 fps range. I have loaded Unique, Blue Dot, HS-6, and HS-7 in other cartridges in the past, but have only loaded Unique in the 40 S&W.

I am not looking so much for a specific load, just for a powder recomendation and why you like/use that powder.

I won't be shooting competitions, so don't need to "make" power factors. They are just for "fun" shooting, as my daughter says.

I won't be using them for ccw carry either; I'll leave that chore to the Golden Sabre's and the Win SXT's.

Thanks for the help in advance.
 
Posts: 5 | Location: Eureka, CA | Registered: 28 January 2005Reply With Quote
one of us
Picture of CDH
posted Hide Post
VihtaVouri VN340 is the go-to for my 40S&W in all bullet weights. It is a bit more expensive than some, but a friend who does VERY well in IPSC competition put me onto it. I have tried several others and keep going back.

It is reasonably clean, gets you very good velocities, and meters well...


Believe nothing, no matter where you read it, or who said it, unless it agrees with your own reason and your own common sense.
 
Posts: 1780 | Location: South Texas, U. S. A. | Registered: 22 January 2004Reply With Quote
One of Us
posted Hide Post
I use Bullseye. For me it works great for informal target shooting and it works well not only for my 40, but my 45 and 9mm as well. I went with it because it worked well with all the pistol calibers I load for so I don't have to have several different powders around for pistol.


NRA Life Member
 
Posts: 37 | Registered: 25 February 2005Reply With Quote
One of Us
posted Hide Post
i was using imr "pb" in 9 mm, after seeing an article in an old issue of
'guns" magazine, tried it and stayed with it. i use remington's 155 gr. hp bought in bulk. gun is a star 31P.
 
Posts: 94 | Registered: 07 February 2005Reply With Quote
one of us
posted Hide Post
I use a Lyman 175 gr. truncated bullet that I cast myself with an alloy of wheelweights with a little Ludlow metal to bring up the tin content. I use AA #7 with Rem. 5-1/2 primers. This is a nice all-around load in my Baby Eagle.
 
Posts: 781 | Registered: 03 January 2004Reply With Quote
One of Us
posted Hide Post
Unique should be pretty good. A bit dirty perhaps.... but accurate and the ideal speed powder for your purposes.

DaMan
 
Posts: 49226 | Registered: 21 January 2001Reply With Quote
one of us
Picture of fredj338
posted Hide Post
Nothing wrong w/ Unique, HS6 is good also. Just about any of the fast to med. powders will get you safely to 1000fps w/ 165gr bullet. BlueDot & HS7 might be abit slow for 900-1000fps loads.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    What powder do you like with 165 Rainiers in 40 S&W

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia