THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Made a mistake, What if ...
 Login/Join
 
one of us
Picture of Wendell Reich
posted
I didn't catch it?

45 ACP, 3.8 g Clays under a 185g bullet. Starting weight is supposed to be 4.5 max is 4.9. Would 3.8 just fail to cycle the action? Or would there be dire consequences? Or would it possibly be a very light shooting round?

The 3.8 charge was for a 230 g bullet. Just had a brain fart and loaded 45 of the 185s.

FWIW, I plan on pulling them. Just wonder what would have happened if I had not caught it?
 
Posts: 6281 | Location: Dallas, TX | Registered: 13 July 2001Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Nothing dire will happen with this load in this cartridge. It's not like getting detonation with light loads of very slow powder in very large magnum cases. Depending on how many you have, I would shoot some and see. Or shoot them in your revolver.
 
Posts: 17441 | Location: USA | Registered: 02 August 2009Reply With Quote
one of us
Picture of hivelosity
posted Hide Post
Wendell, probably all of the above,
I would tear them down and start over, justme killpc
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
one of us
posted Hide Post
Unless you loaded hundreds of them, I'd go out and have a fun point and shoot or whatever session. You might have to cycle them by hand, or if you're using a target spring in a 1911, they might/probably will cycle.


xxxxxxxxxx
When considering US based operations of guides/outfitters, check and see if they are NRA members. If not, why support someone who doesn't support us? Consider spending your money elsewhere.

NEVER, EVER book a hunt with BLAIR WORLDWIDE HUNTING or JEFF BLAIR.

I have come to understand that in hunting, the goal is not the goal but the process.
 
Posts: 17099 | Location: Texas USA | Registered: 07 May 2001Reply With Quote
One of Us
posted Hide Post
Obviously you need to go out and buy a 625 S&W to burn them up in!
 
Posts: 559 | Location: Mostly USA | Registered: 25 March 2011Reply With Quote
one of us
Picture of Wendell Reich
posted Hide Post
quote:
Originally posted by Ongwe:
Obviously you need to go out and buy a 625 S&W to burn them up in!

You win. Best answer.

Unfortunately, I already pulled them. Maybe I should reload them again to give me a reason! Right, like I ever needed a reason to buy a gun. Desire has always been enough for me.

This is my first run at reloading pistol ammo. I do a lot of rifle, but this is new territory for me.

Thanks for the answers.
 
Posts: 6281 | Location: Dallas, TX | Registered: 13 July 2001Reply With Quote
One of Us
Picture of Rapidrob
posted Hide Post
You may get stove piping. I'd just shoot it.


Gulf of Tonkin Yacht Club
NRA Endowment Member
President NM MILSURPS
 
Posts: 451 | Location: Albuquerque | Registered: 28 March 2013Reply With Quote
One of Us
Picture of Labman
posted Hide Post
I had a similar thing happen to me years ago. I started to get failures to cycle in a Kimber 1911 shooting my standard load of 4.2 grains of clays behind a 200 Gr. lead bullet. Checked the charges thrown by the progressive press and found that they were all light. Charge bar needed an adjustment.

Problem was I had about 1,500 of rounds loaded with light charges. I didn't want to pull that many rounds so I installed a light 11 lb. recoil spring in my gun and shot up all the rounds with no problems.


Tom Z

NRA Life Member
 
Posts: 2347 | Location: Pennsylvania | Registered: 07 January 2005Reply With Quote
One of Us
Picture of Oddbod
posted Hide Post
A large pistol primer will propel a 230gr LRN a couple of inches down the barrel of a 1911 with no powder whatsoever(DAMHIK Whistling ), so I reckon your light load would have done rather more than that.
 
Posts: 610 | Location: Cumbria, UK | Registered: 09 July 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia