The Accurate Reloading Forums
Made a mistake, What if ...

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/9261081981

19 May 2013, 19:40
Wendell Reich
Made a mistake, What if ...
I didn't catch it?

45 ACP, 3.8 g Clays under a 185g bullet. Starting weight is supposed to be 4.5 max is 4.9. Would 3.8 just fail to cycle the action? Or would there be dire consequences? Or would it possibly be a very light shooting round?

The 3.8 charge was for a 230 g bullet. Just had a brain fart and loaded 45 of the 185s.

FWIW, I plan on pulling them. Just wonder what would have happened if I had not caught it?
19 May 2013, 19:59
dpcd
Nothing dire will happen with this load in this cartridge. It's not like getting detonation with light loads of very slow powder in very large magnum cases. Depending on how many you have, I would shoot some and see. Or shoot them in your revolver.
19 May 2013, 20:02
hivelosity
Wendell, probably all of the above,
I would tear them down and start over, justme killpc
19 May 2013, 22:00
Gatogordo
Unless you loaded hundreds of them, I'd go out and have a fun point and shoot or whatever session. You might have to cycle them by hand, or if you're using a target spring in a 1911, they might/probably will cycle.


xxxxxxxxxx
When considering US based operations of guides/outfitters, check and see if they are NRA members. If not, why support someone who doesn't support us? Consider spending your money elsewhere.

NEVER, EVER book a hunt with BLAIR WORLDWIDE HUNTING or JEFF BLAIR.

I have come to understand that in hunting, the goal is not the goal but the process.
20 May 2013, 01:11
Ongwe
Obviously you need to go out and buy a 625 S&W to burn them up in!
20 May 2013, 02:19
Wendell Reich
quote:
Originally posted by Ongwe:
Obviously you need to go out and buy a 625 S&W to burn them up in!

You win. Best answer.

Unfortunately, I already pulled them. Maybe I should reload them again to give me a reason! Right, like I ever needed a reason to buy a gun. Desire has always been enough for me.

This is my first run at reloading pistol ammo. I do a lot of rifle, but this is new territory for me.

Thanks for the answers.
20 May 2013, 03:54
Rapidrob
You may get stove piping. I'd just shoot it.


Gulf of Tonkin Yacht Club
NRA Endowment Member
President NM MILSURPS
20 May 2013, 19:03
Labman
I had a similar thing happen to me years ago. I started to get failures to cycle in a Kimber 1911 shooting my standard load of 4.2 grains of clays behind a 200 Gr. lead bullet. Checked the charges thrown by the progressive press and found that they were all light. Charge bar needed an adjustment.

Problem was I had about 1,500 of rounds loaded with light charges. I didn't want to pull that many rounds so I installed a light 11 lb. recoil spring in my gun and shot up all the rounds with no problems.


Tom Z

NRA Life Member
21 May 2013, 07:27
Oddbod
A large pistol primer will propel a 230gr LRN a couple of inches down the barrel of a 1911 with no powder whatsoever(DAMHIK Whistling ), so I reckon your light load would have done rather more than that.