I bought a used one to start my own reloading supply collection after I got married and moved away from dad's stuff. How good is the Lyman 55? It looks to be an easy-to-adjust measure and I've heard that it's accurate. I paid $15 for it and it's in good condition, so I'm not out too much. Yardbird
I have one that is a pre-orange model. I got it probably 25 years ago and it has worked great ever since. It cam with two drop tubes that are about 2" long.
Posts: 172 | Location: Danville, VA, USA | Registered: 08 October 2001
I also have the dark gray model of the 55. Bought mine roughly 30 years ago and its been in steady use ever since. I use the RCBS electric seein-eye dog powder dispenser with digital scale for rifle reloading. I get close then trickle up. But for pistol, nothing beats the 55. Once you get it on, its there. I check about every 10th one and can usually go 100 to 150 rounds before adding powder. I bent my drop tube inward by over-tightening the small screw for years and finally ordered another set of drop tubes from Lyman. No problem. Also went to the hardware store and got a new screw with a knob on it for tightening the body to the drop tube. Works pretty good. Ed
Posts: 235 | Location: Ladson, SC, USA | Registered: 02 April 2002
Gents, I have been using a Lyman 55 since about '85. Got it used in a box of misc. reloading gear that also had a Lyman All-American Turret press,they have been my favorites ever since for most of my handloading career. I now have a Dillon 550 bolted to the bench too,but that Lyman gear still comes through when I don't need 500 rounds of something fast. 45nut
Posts: 538 | Location: elsewhere | Registered: 07 July 2001
I started reloading with mine Lyman powder measure 45 years ago and still use it. Like all good reloading equipment, it will outlast the owner and I shudder to think how many charges mine has measured for me.
It's as good as any on the rifle charges and better than the rest for pistol. It will accurately measure as small a charge as you could ever want to go. I've used it for specialty loads down to .5 gr Bullseye.
Try that charge with the others.
Posts: 19677 | Location: New Mexico | Registered: 23 May 2002
I've been loading on a Lyman 55 for about 33 years now, and it's never missed a beat. I've found that not having a powder baffle doesn't affect the accuracy in the least. Bill T.
It is as good as any...A powder measure is as good or bad as the operator, consistency is the key to powder measures...It takes awhile to learn each powder measures quirks, likes and dislikes, once your used to it, learned its ways, it is clear sailing from then on....you got a good deal.
Posts: 42507 | Location: Twin Falls, Idaho | Registered: 04 June 2000