THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
30-06 Powder Question
 Login/Join
 
one of us
Picture of Leo M
posted
I have been searching and reading. I want to shoot 180 grain Accubonds in a 30-06 and thinking of trying H4350, which I have. Looking for velocity, so my question is; is there anything to be gained with trying RL 22, H or IMR 4831, and IMR 4350? Thanks for any help.
 
Posts: 188 | Location: New Brunswick, Canada | Registered: 25 May 2001Reply With Quote
one of us
posted Hide Post
I have done well with R22 behind 180 Accubonds and other 180s in the 06. Try it.

ned


it's a fresh wind that ... Blows Against the Empire
 
Posts: 225 | Location: houston, tx | Registered: 04 February 2003Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
all of these work well but RL-22seems to have a slight edge. Also H-414 works well too.

Frankly.....the difference is so little that you might want to try several powders for yourself.....but either of the 4350 powders are excellent in the old '06


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
I bet you are talking less than 100fps spread top to the bottom. If you have the one powder try it. If you get an accurate load close to max I wouldn't spend much money looking at others.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
posted Hide Post
quote:
If you have the one powder try it. If you get an accurate load close to max I wouldn't spend much money looking at others.


+1 to that. Rifles are very individual. What works in mine may or may not work as well in yours. So if you have one of these, try it before buying a can of something you don't have. If it works, great and you've avoided buying unnecessary powder. If it doesn't, then get another.

LWD
 
Posts: 2104 | Location: Fort Worth, Texas | Registered: 16 April 2006Reply With Quote
one of us
Picture of Jay Gorski
posted Hide Post
If youre looking for velocity over accuracy, RE19 should give you that, try RE15 for the most accuracy, 47.5-48.5grs.
 
Posts: 1745 | Location: WI. | Registered: 19 May 2003Reply With Quote
one of us
Picture of South40
posted Hide Post
60.0 gr of H4831SC and 180 gr Rem PSP's is extremely accurate in my '06. S40


Youth and vitality are wasted on the young.
 
Posts: 442 | Location: Way out west | Registered: 28 March 2001Reply With Quote
One of Us
posted Hide Post
I have found that IMR 4350 and IMR 4831 both work extremely well in my 30-06 with different bullets. I have shot mostly Rem 180 pspcl s, 180 Hornady sp, and Nosler 180 Partitions. If I do things right, I can group under .75 at 100 with most loads, under .5 with some.
Regards,
Graham
 
Posts: 264 | Location: Northern BC, Canada | Registered: 28 November 2005Reply With Quote
One of Us
posted Hide Post
H-4831
 
Posts: 82 | Location: SW FL | Registered: 19 July 2007Reply With Quote
one of us
posted Hide Post
4350 and 180 grain bullets is a classic combination for the 30/06. Most will achieve in the neighborhood of 2800fps at max levels.
This is one of those combos that works so well, I reach for 4350 ahead of anything else for the '06. If it doesn't work, I figure there's something wrong with the rifle. By the way, I have used IMR, XMR, and H4350 and all have worked equally well. Regards, Bill.
 
Posts: 3834 | Location: Elko, B.C. Canada | Registered: 19 June 2000Reply With Quote
one of us
posted Hide Post
I expect your gun will shoot the H-4350 just fine. If so use it and don't look back. It is as good as there is and has a quality that no other powder on the shelf has. It is PP



Previously Purchased. Wink Good hunting. "D"


Although cartridge selection is important there is nothing that will substitute for proper first shot placement. Good hunting, "D"
 
Posts: 1701 | Location: Western NC | Registered: 28 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia