THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
REALLY BIG TUMBLER!!!
 Login/Join
 
One of Us
posted
These nice folks make three sizes of tumblers like this model here in the USA if you need to tumble a large quantity of large cases.

NEW LINK
 
Posts: 13301 | Location: On the Couch with West Coast Cool | Registered: 20 June 2007Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
The link appears to be nonfunctional...


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
http://www.abrasivefinishing.com/burrbench/burrbench.htm

I gave Hubel458 one of the above companies 2016 models, IIRC it was only 1/2 full with 250 pieces of 50BMG brass and media on board, it should be able to handle 400 pieces of 50BMG or a whole bunch of "little" brass at one time.

 
Posts: 2124 | Location: Whittemore, MI, USA | Registered: 07 March 2002Reply With Quote
One of Us
posted Hide Post
I have a big tumbler I bought at Harbor Freight, it's an electric cement mixer. I can tumble a 5 gallon bucket of .40 S&W cases in a 5 gallon bucket of corn cob and it's nice and shiny in about 30 minutes. I think it was about $200.
 
Posts: 385 | Location: Brunswick, GA | Registered: 15 April 2005Reply With Quote
One of Us
posted Hide Post
Look like they changed their page from frames format to non frames and the link was bye bye...all good now...
 
Posts: 13301 | Location: On the Couch with West Coast Cool | Registered: 20 June 2007Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
I'd sure like to try some of this stuff....it won't clog primer pockets at all.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
Most of that media is pretty aggressive and will actually take the edegs off parts. You might try the plastic and see if it's stays clean enough for long enough with fired cases...
 
Posts: 13301 | Location: On the Couch with West Coast Cool | Registered: 20 June 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia