The Accurate Reloading Forums
REALLY BIG TUMBLER!!!

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/908106629

10 September 2008, 04:58
Macifej
REALLY BIG TUMBLER!!!
These nice folks make three sizes of tumblers like this model here in the USA if you need to tumble a large quantity of large cases.

NEW LINK
10 September 2008, 13:41
vapodog
The link appears to be nonfunctional...


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
10 September 2008, 17:31
Tailgunner
http://www.abrasivefinishing.com/burrbench/burrbench.htm

I gave Hubel458 one of the above companies 2016 models, IIRC it was only 1/2 full with 250 pieces of 50BMG brass and media on board, it should be able to handle 400 pieces of 50BMG or a whole bunch of "little" brass at one time.


10 September 2008, 20:06
kend
I have a big tumbler I bought at Harbor Freight, it's an electric cement mixer. I can tumble a 5 gallon bucket of .40 S&W cases in a 5 gallon bucket of corn cob and it's nice and shiny in about 30 minutes. I think it was about $200.
11 September 2008, 05:52
Macifej
Look like they changed their page from frames format to non frames and the link was bye bye...all good now...
11 September 2008, 07:32
vapodog
I'd sure like to try some of this stuff....it won't clog primer pockets at all.



///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
11 September 2008, 08:05
Macifej
Most of that media is pretty aggressive and will actually take the edegs off parts. You might try the plastic and see if it's stays clean enough for long enough with fired cases...