THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
imr 3031 or H BLC2
 Login/Join
 
one of us
posted
3031 or BLC2

What? which? UHH?
 
Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002Reply With Quote
one of us
posted Hide Post
For what?

3031 is a much faster powder than is BLC2. Have used the latter for cases in the 308 to 30-06 range. It does tend to have significant muzzle flash but has been quite accurate for me.


Mike

--------------
DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ...
Knifemaker, http://www.mstarling.com
 
Posts: 6199 | Location: Charleston, WV | Registered: 31 August 2002Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by mstarling:
For what?


Agreed!!!!!.....I've used both in the .223 and FWIW I'll use ball powders every time I get a chance in cases smaller than the 30-06......and even use H-414 at times in the 30-06too!

Ball powders meter beautifully and are easier to load with!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
9.3x57

I use imr4895 with a 286gr

With a 232gr imr3031 is published data powder for 9.3x57 but was looking for a simular burn rate powder to 3031.
 
Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia