The Accurate Reloading Forums
imr 3031 or H BLC2

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/862106176

12 May 2007, 09:03
GSP7
imr 3031 or H BLC2
3031 or BLC2

What? which? UHH?
12 May 2007, 17:26
mstarling
For what?

3031 is a much faster powder than is BLC2. Have used the latter for cases in the 308 to 30-06 range. It does tend to have significant muzzle flash but has been quite accurate for me.


Mike

--------------
DRSS, Womper's Club, NRA Life Member/Charter Member NRA Golden Eagles ...
Knifemaker, http://www.mstarling.com
12 May 2007, 21:46
vapodog
quote:
Originally posted by mstarling:
For what?


Agreed!!!!!.....I've used both in the .223 and FWIW I'll use ball powders every time I get a chance in cases smaller than the 30-06......and even use H-414 at times in the 30-06too!

Ball powders meter beautifully and are easier to load with!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
12 May 2007, 21:59
GSP7
9.3x57

I use imr4895 with a 286gr

With a 232gr imr3031 is published data powder for 9.3x57 but was looking for a simular burn rate powder to 3031.