THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
FINDING LOADS
 Login/Join
 
new member
posted
Hey
I was wondering if when youall are grouping a new load that if there is more then one sweet load. That if you find a load that works like say 70gr of h4831 gives you a 5. inch at if you go up or down a few grams if it will come together again. This goes for all calibers.
 
Posts: 14 | Registered: 17 February 2004Reply With Quote
one of us
posted Hide Post
If the barrel is short and fat, the group size does not change much with powder charge.

If the barrel is a long whip, the charge needs to be tuned so that the bullet comes out when the barrel muzzle is moving the slowest in it's sinusoid of motion.
Or you can put one of the accu adjuster things on the muzzle and tune the barrel to the load.
 
Posts: 2249 | Registered: 27 February 2001Reply With Quote
new member
posted Hide Post
I do not think that a worded the question right .I meant that if you found a grate load like 70gr of imr that gave you one point of entrance that the same powder would give a equal grouping at a larger or less powder charge?
 
Posts: 14 | Registered: 17 February 2004Reply With Quote
new member
posted Hide Post
Thanks gays , that is what I wanted to know. That there is a possibility
 
Posts: 14 | Registered: 17 February 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia