THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
to lube or not to lube
 Login/Join
 
new member
posted
do you need to use lube when using a redding type s neck sizing die as i have just buggered one up and now i am not sure if i should use it or not! to date i have not used it but if any body can help i would be gratefull


one shot one kill is true firepower
 
Posts: 2 | Location: norfolk u.k. | Registered: 04 March 2005Reply With Quote
One of Us
Picture of brainshot
posted Hide Post
If you do not lube, you will need much more force on your lever and perhaps will form the case in a way you will not want to. Inside lubing of the neck is critical and should be done with a good lube like Lees lube. It is water solvent and wil not chemically affect your charge.
 
Posts: 79 | Location: Vienna, Austria, Europe | Registered: 06 March 2005Reply With Quote
one of us
posted Hide Post
Welcome both of you,fine having members from all over the world.I use a metal polish to clean the inside of the neck case,if you lube inside the case neck,a good thing to do,(tension gip)the expander ball will get "fouling"etc..,clean it with with a piece of cloth etc...
 
Posts: 439 | Location: Quebec Canada | Registered: 27 August 2001Reply With Quote
one of us
posted Hide Post
spudgun,

Welcome to the forum. How have you buggered one up? What happens now when you size a lubricated case?

One needs to lubricate the the outside of each case neck and the inside if the expanding button is used. The idea of the "S" type dies is to not use the button however unless necessary. You should find a decapping pin holder in the box that does not use an expanding button.

If the die now scratches the outside of the necks I will advise how to polish it.


Join the NRA
 
Posts: 5543 | Registered: 09 December 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia