THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
8mm I bullet
 Login/Join
 
One of Us
posted
Hi,

I already posted this on the medium bores forum but it occurred to me that this might, in fact, be the more correct place for the question so here goes:

Anyone got any idea where to obtain the .318" diameter I bullet?

I know Sellier & Bellot loads 8x57I ammo so they'll probably have the bullets. Woodleigh also has - who else?

Already checked RWS & Norma, too. RWS has the TMR, Norma nothing.

- Lars/Finland


A.k.a. Bwana One-Shot
 
Posts: 556 | Location: Finland | Registered: 07 August 2007Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
Check out Woodleigh!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
The bores of the 88 Commission rifles are about .320 so it is possible to use the .321 bullets made by Speer and Hornady.
 
Posts: 13978 | Location: http://www.tarawaontheweb.org/tarawa2.jpg | Registered: 03 December 2008Reply With Quote
One of Us
posted Hide Post
have a look in the catalogue of Johannsen Jagd. They sell 8 mmJ bullets made by Degol, Woodleigh,Geco, S&B and RWS and they will probably ship them to Finland.
http://www.johannsen-jagd.de/d.../katalog/katalog.php
 
Posts: 98 | Location: Netherlands | Registered: 25 December 2003Reply With Quote
One of Us
posted Hide Post
its really no big deal to make a simple bump down die for bumping down a 323
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia