The Accurate Reloading Forums
8mm I bullet

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/7231091061

04 August 2011, 16:23
Schauckis
8mm I bullet
Hi,

I already posted this on the medium bores forum but it occurred to me that this might, in fact, be the more correct place for the question so here goes:

Anyone got any idea where to obtain the .318" diameter I bullet?

I know Sellier & Bellot loads 8x57I ammo so they'll probably have the bullets. Woodleigh also has - who else?

Already checked RWS & Norma, too. RWS has the TMR, Norma nothing.

- Lars/Finland


A.k.a. Bwana One-Shot
04 August 2011, 16:46
vapodog
Check out Woodleigh!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
06 August 2011, 05:41
SR4759
The bores of the 88 Commission rifles are about .320 so it is possible to use the .321 bullets made by Speer and Hornady.
07 August 2011, 19:51
dutchgus
have a look in the catalogue of Johannsen Jagd. They sell 8 mmJ bullets made by Degol, Woodleigh,Geco, S&B and RWS and they will probably ship them to Finland.
http://www.johannsen-jagd.de/d.../katalog/katalog.php
07 August 2011, 21:52
butchloc
its really no big deal to make a simple bump down die for bumping down a 323