THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
More Military Surplus powder loading data
 Login/Join
 
One of Us
Picture of bartsche
posted
Roll EyesMil surp load data
.222 wsr primers
    . 55 gr A Max. 24.5gr WCC844, oal=2.252",3103 to 3136 fps. 50 yds. 4 shot 1/2" group.
  • 52gr.,hpbt Sierra, 24.5gr. WCC844, oal=2.230", 3118 fps.,3 shot 3/8" group 50 yds.hot barrel, mild.
  • 46gr. RNHP.20gr Turk powder,,oal=2.080",mild, alittle sooty, 2954 to 3015 fps., 3 shot 1/4" grp 50 yds.
  • 46gr.RNHP, 26.5gr. 2230-C,oal= 2.080"primer a little flat, 3329 to 3372fps, hot barrel,5 shot 1/2' group at 50 yds.
  • 46gr. RNHP, 21.1gr. ACC73,oal=2.1"3" low,mild and sooty,2636 to 2784 fps.Soot might be eliminated with mag primer and heavier load. 5 shot 1' group 50 yds.

    .243 with wlrm primers
  • 58gr Vmax. Hornady, 45gr. WCC846,oal= 2.606,mild and sooty, a lot of blast, 5 shot 1/2" group 50 yds.Chrono not working Sun problem. a lot of blast
  • 75gr HP Sierra, 39gr.WCC846, oal= 2.660", mild sooty , 3 shots 1 hole 50 yds.CNW
  • 80gr. SBT, Sierra, 39gr. WCC846 oal=2.730", 5 shots touch, mild sooty, a lot of blast.
  • 95gr. hpbt berger, 41gr. 7383, flat primer, all powder burned, 2976 to 3091 fps. 10 shot group 1/2" vertical 1 1/2" horizontal
  • 95gr. hpbt. Berger, 35gr. 8208, oal= 2.281", 2975 to 3074 fps., 3 shot 1/4" group, 10 shots you could cover with a quarter.
The WCC846 continues to show good results but is dirty.
if you can find 8208 buy it.
Notice the 7383 entry.It looks like max or near max pressure. Remeber this is quirky stuff.


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
 
Posts: 10226 | Location: Temple City CA | Registered: 29 April 2003Reply With Quote
one of us
posted Hide Post
Roger, I'm not surprised 41gr. IMR 7383 showed pressure signs with a 95gr. bullet since my lot did the same with lighter bullets. I'm using 85gr. Sierra SP's and 87gr. Hornady BTSP's with no more than 41gr. for that very reason. Actually 40gr. is even better since it -> ~3,000 fps (from a 26" bbl.), great accuracy and moderate pressure.
 
Posts: 480 | Location: N.Y. | Registered: 09 January 2003Reply With Quote
One of Us
Picture of bartsche
posted Hide Post
quote:
Originally posted by Paul Brasky:
Roger, I'm not surprised 41gr. IMR 7383 showed pressure signs with a 95gr. bullet since my lot did the same with lighter bullets. I'm using 85gr. Sierra SP's and 87gr. Hornady BTSP's with no more than 41gr. for that very reason. Actually 40gr. is even better since it -> ~3,000 fps (from a 26" bbl.), great accuracy and moderate pressure.


If you have any new info on 7383 please post or send it to me and I'll eventually post an addendum to the report. It was nice working with a man of your caliber on this project. thumbroger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
 
Posts: 10226 | Location: Temple City CA | Registered: 29 April 2003Reply With Quote
one of us
posted Hide Post
Roger, I have some data for IMR 7383 in the .30-06, but it is limited to 125gr. SP's that I had on hand. I used Rem. & Win. brass, WLR primers and 55gr. IMR 7383 v. 55gr. IMR 4350 in a 22" bbl'ed Win. Mod. 70 Westerner (blind mag.):

55gr. 4350 -> 2,545fps; SD = 23; ES = 64 (n = 4)

55gr. 7383 -> 2,697fps; SD = 22; ES = 77 (n=22)

Although I didn't note it, the 7383 loads were compressed. Accuracy was excellent and pressure was moderate; i.e, about the same as I got from 4350 judging by primer appearance and extraction. Btw, I attempted to load 7383 in 8mm Mau. brass with 150gr. SP's, but couldn't even get 50grs. into the cases.

Two things to note from the above and past experience with 7383: First, it appears to be sensitive to ambient temperature. Thus I'd drop back at least 1gr. when the outside temp. exceeds 85 deg. Second, it isn't the best powder for all cartridges, the 8mm Mau. for example. IMR 4064 is much better suited to the 8mm Mau. than either IMR 4350 or IMR 7383.
 
Posts: 480 | Location: N.Y. | Registered: 09 January 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia