Go | New | Find | Notify | Tools | Reply |
<modle 88> |
What is your favorite load for a 308win mine is 42gr of imr 3031 and sierra spitzer boat tails.Thanks | ||
one of us |
modle88 - 48 Accurate Arms 4064/150 Speer Mag-Tip/Fed. Gold Medal Match Case/Fed. 210M primer/2.795" O'all. R-WEST ------------------ | |||
|
<Powderman> |
42.0, IMR 4895. Military Surplus 150 grain FMJBT. Federal Match LR primers. Seat to the cannelure, moderate crimp with Lee Factory Crimp die. Shoots like gangbusters!!!! | ||
one of us |
46 grains Varget behind a Speer 165 SP, CCI 200. Unlike many of Hodgdon's claims, this particular combination shoots the same hot or cold. | |||
|
one of us |
modle 88, 46 gr Hodgdon Varget/bullet Lupua 168 gr BTHP/in a case Lapua/velocity 2735 fps : ------------------ | |||
|
one of us |
150 gr Sierra SBT, 44.2 gr W748, Win LR primer. | |||
|
<Wolverine> |
So far: 180 gr Nosler Ballistic Tip Always start low and work up. | ||
<Michael Swickard> |
wolverine Have you tried light bullets 125-135 with reloder 15 in the 308? Mike | ||
<modle 88> |
Wow not that many people use imr powders why is that! | ||
<Wolverine> |
Bruce: Wind gust maybe? | ||
<savageman> |
In My Savage 11FC, I have had great luck using 44.5Gr. H335 powder, Winchester primers, Sierre 150Gr. Gameking bullets, remington brass, and a AOL of 2.775. My average groups are around 3/4" @ 100M. Best group was 3/8". | ||
one of us |
150 grain Nosler Ballistic Tips over 49 grains of WW748. CCI BR primers and Norma brass. Not my most accurate load ( groups hover around 0.75 MOA ), but pressures are low and brass seems to last longer. Plenty for Peidmont NC whitetails. | |||
|
<THUNDER> |
mod 88, In my Model 88 Win. I use 43gr. Imr 3031, 150 grain Sierra Spitzer. In my two SAKO bolt actions I use 47 grains of Imr 4064. Fed. 210M primers & Fed. cases. T | ||
<nated> |
bruce, is that the 20" jober? that's a pretty good group anyway, but with a shortie, wow. what else have you tried and found that works? i'm getting about .75 moa at 300yds. with some smaller using 168 MK's. thanks for the input. good shooting, nated | ||
<Michael Swickard> |
Here is what 45 grains of N135 and 46.3 grains of N140 will do in Lapua brass w/ 134/10 ogive BIB Bullet from my Hunter Benchrest Rifle. Rem 722 action, Lilja 15 twist barrel 22.8", McMillain HBR stock (old Model), Leupold 6x Compact w/ AO, Jewell trigger. The first target shows what happens when I seated the bullet 0.020" off the jam. The second target is using N140 powder.
[This message has been edited by Michael Swickard (edited 01-31-2002).] [This message has been edited by Michael Swickard (edited 01-31-2002).] [This message has been edited by Michael Swickard (edited 01-31-2002).] | ||
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia