THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
6.5X57 data,
 Login/Join
 
One of Us
posted
I am loading up some ammo for my new 6.5X57.
I have a little in my old hornady manual.
But I want some data for H-414. I am planning to use this powder with a 125 grain Nosler partition.
...tj300


freedom1st
 
Posts: 2450 | Registered: 09 June 2005Reply With Quote
One of Us
Picture of El Deguello
posted Hide Post
I believe you can use starting loads given for the 6.5X55 to begin working up.... they are similar in case capacity..... If anything, the 57mm case holds a couple of grains more than the 55mm case...


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
 
Posts: 4386 | Location: New Woodstock, Madison County, Central NY | Registered: 04 January 2005Reply With Quote
One of Us
posted Hide Post
thats what I will likly do,
But I bet I can go up alot from most 6.5 loads, as my rifle is a 98 and most swede loads are held back a bit...tj3006


freedom1st
 
Posts: 2450 | Registered: 09 June 2005Reply With Quote
one of us
posted Hide Post
How this? chrony your loads,stop at 260 velocities.+/- 25f/s for barrel length.The 260 case is smaller.This only works if your barrel is fairly standard.I had a FN 264 barrel that ran 300f/s slow.What idiot thought all those lands would work in 264?


You can hunt longer with the wind at your back
 
Posts: 480 | Location: B.C.,Canada | Registered: 20 January 2002Reply With Quote
one of us
posted Hide Post
/
 
Posts: 7856 | Registered: 16 August 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia