The Accurate Reloading Forums
6.5X57 data,

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/709109036

27 February 2007, 18:48
Thomas Jones
6.5X57 data,
I am loading up some ammo for my new 6.5X57.
I have a little in my old hornady manual.
But I want some data for H-414. I am planning to use this powder with a 125 grain Nosler partition.
...tj300


freedom1st
27 February 2007, 19:15
El Deguello
I believe you can use starting loads given for the 6.5X55 to begin working up.... they are similar in case capacity..... If anything, the 57mm case holds a couple of grains more than the 55mm case...


"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
28 February 2007, 05:44
Thomas Jones
thats what I will likly do,
But I bet I can go up alot from most 6.5 loads, as my rifle is a 98 and most swede loads are held back a bit...tj3006


freedom1st
28 February 2007, 09:22
downwindtracker2
How this? chrony your loads,stop at 260 velocities.+/- 25f/s for barrel length.The 260 case is smaller.This only works if your barrel is fairly standard.I had a FN 264 barrel that ran 300f/s slow.What idiot thought all those lands would work in 264?


You can hunt longer with the wind at your back
28 February 2007, 09:59
ALF
/