THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Is this old reloading equipment?
 Login/Join
 
One of Us
posted
Someone posted this as a what is it? and it looks to me as some sort of antique reloading equip.

Any idea?
 
Posts: 34 | Registered: 08 March 2008Reply With Quote
One of Us
posted Hide Post
.
 
Posts: 34 | Registered: 08 March 2008Reply With Quote
new member
posted Hide Post
Flux capacitor?
 
Posts: 22 | Location: NW N.M. | Registered: 16 July 2010Reply With Quote
One of Us
Picture of Grumulkin
posted Hide Post
I think it's probably a warp core injector.
 
Posts: 2911 | Location: Ohio, U.S.A. | Registered: 31 March 2006Reply With Quote
One of Us
Picture of Bob from down under
posted Hide Post
A Daisy Cutter control box cover mold?


Regards,
Bob.
 
Posts: 480 | Location: Australia | Registered: 15 August 2007Reply With Quote
One of Us
posted Hide Post
rosette cookie cutter - Scandinavian holiday cookie
 
Posts: 13466 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by butchloc:
rosette cookie cutter - Scandinavian holiday cookie
tu2


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
Check carefully for protruding wires and listen for ticking sound. Don't know what it is but don't jostle it around.


Pancho
LTC, USA, RET

"Participating in a gun buy-back program because you think that criminals have too many guns is like having yourself castrated because you think your neighbors have too many kids." Clint Eastwood

Give me Liberty or give me Corona.
 
Posts: 941 | Location: Roswell, NM | Registered: 02 December 2002Reply With Quote
one of us
Picture of Clem
posted Hide Post
It's an Illudium PU-36 Explosive Space Modulator.
 
Posts: 1292 | Location: I'm right here! | Registered: 01 July 2004Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
It's a cutting die...probably a clicker die, for what I don't know


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
Picture of Kevin Rohrer
posted Hide Post
It's the original prototype for Al Gore's Internet.


Member:
Orange Gunsite Family, NRA--Life, Varmint Hunters' Assn., ARTCA, and American Legion.

"An armed society is a polite society" --Robert Heinlein via Col. Jeff Cooper, USMC

Caveat Emptor: Don't trust *Cavery Grips* from Clayton, NC. He is a ripoff.
 
Posts: 479 | Location: Medina, Ohio USA | Registered: 30 January 2010Reply With Quote
One of Us
posted Hide Post
Dilithium crystals.
 
Posts: 1077 | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
Check some of Nikola Tesla's notes.
 
Posts: 231 | Location: Republic of Texas | Registered: 19 June 2003Reply With Quote
One of Us
posted Hide Post
The inside part expands .223 Magazines to hold 6.8 SPC rounds.

The outside begins the crimp on brass shotguns shells.
 
Posts: 3034 | Location: Colorado | Registered: 01 July 2010Reply With Quote
Moderator
Picture of jeffeosso
posted Hide Post
wht sort of antiques are you going to reload with it?

muffler bearings or carburetor grease?


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40092 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
one of us
posted Hide Post
A really fancy Bundt cake mold. Go easy on the R/L-22. It changes how fast the cake rises depending on ambient temperature.


 
Posts: 7158 | Location: Snake River | Registered: 02 February 2004Reply With Quote
One of Us
Picture of BNagel
posted Hide Post
Transmogrifier exhaust manifold


_______________________


 
Posts: 4895 | Location: Bryan, Texas | Registered: 12 January 2005Reply With Quote
new member
posted Hide Post
It's actually 0bama's economic model - has holes all the way through it ...........
 
Posts: 18 | Location: Boerne, Tx | Registered: 27 July 2009Reply With Quote
One of Us
Picture of 45otto
posted Hide Post
Ok, here is the answer. It's the waternator for the mufflometer on a series 71 detroit with the new urea injection exhaust system designed to work in conjunction with the exhaust cooler before the turbo. The trick here is the exhaust runs the turbo and then circles back around and is then "reburned" in the engine. You can only find these on the new NASCAR "green" powerplants that are highly championed by Palosi and Gore. The idea is that the exhaust never realey enters the atmosphere, it just keeps cycling through the engine until it reaches critical mass and eventually turns into diamonds. That is until the exhaust cooler fails at which time pure engine coolant and engine oil is pumped into the combustion chamber and creates a dense steam fog and causes the engine to go into an uncontrolled compression combustion "run away" situation until the entire system explodes killing any living thing within a 2 mile radius.


______________________


Are you gonna pull those pistols or whistle Dixie?
 
Posts: 439 | Location: Rosemount, MN | Registered: 07 October 2005Reply With Quote
One of Us
Picture of Cary Howard
posted Hide Post
Damn sure looks like a thingymajigger to me!
 
Posts: 210 | Location: Oklahoma | Registered: 20 July 2010Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia