THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
RCBS Press with Hornady Dies?
 Login/Join
 
robncolorado
One of Us
Picture of robncolorado
posted
So i bought a 450 Nitro Express, it comes with Hornady dies that are still enroute to me. Does anyone know if they can be used with a RCBS Rockchucker 4 press? Kinda of an odd question, but all i’ve used are RCBS Dies sets. TIA
 
Posts: 567 | Location: Durango, CO | Registered: 18 July 2005Reply With Quote
JTEX
One of Us
posted Hide Post
Your new dies will work fine in the rock chucker
 
Posts: 42463 | Location: Crosby and Barksdale, Texas | Registered: 18 September 2006Reply With Quote
eagle27
One of Us
Picture of eagle27
posted Hide Post
quote:
Originally posted by robncolorado:
So i bought a 450 Nitro Express, it comes with Hornady dies that are still enroute to me. Does anyone know if they can be used with a RCBS Rockchucker 4 press? Kinda of an odd question, but all i’ve used are RCBS Dies sets. TIA


I've got Hornady dies for my 7mmWSM plus Lyman and RCBS dies for various other cartridges and they all fit in my Pacific press that takes standard 7/8"-14 threaded dies.
 
Posts: 3928 | Location: Rolleston, Christchurch, New Zealand | Registered: 03 August 2009Reply With Quote
dpcd
One of Us
Picture of dpcd
posted Hide Post
All dies work on all presses; mostly. Don't worry. Especially a Rock Chucker.
As well as these I have; Lyman, Lee, Herters, Redding, Hornady, RCBS, CH$D, old ones with no name, and ones I make. All are 7/8ths X14 for a reason.
 
Posts: 17384 | Location: USA | Registered: 02 August 2009Reply With Quote
Stonecreek
one of us
posted Hide Post
quote:
Originally posted by dpcd:
All dies work on all presses; mostly. Don't worry. Especially a Rock Chucker.
As well as these I have; Lyman, Lee, Herters, Redding, Hornady, RCBS, CH$D, old ones with no name, and ones I make. All are 7/8ths X14 for a reason.
What? No Lachmiller, Pacific, Texan, or Ruhr-American?
 
Posts: 13265 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
cgbach
One of Us
posted Hide Post
I still have a couple sets of Lachmiller dies that belonged to my dad. And then there was Hollywood. I don't remember if they were 7/8 or something else.
C.G.B.
 
Posts: 1103 | Registered: 25 January 2005Reply With Quote
jeffeosso
Moderator
Picture of jeffeosso
posted Hide Post
7/8 thread dies will work -- the LnL bushing, if you buy that, i don't think work with anything else


opinions vary band of bubbas and STC hunting Club

Information on Ammoguide about
the416AR, 458AR, 470AR, 500AR
What is an AR round? Case Drawings 416-458-470AR and 500AR.
476AR,
http://www.weaponsmith.com
 
Posts: 40054 | Location: Conroe, TX | Registered: 01 June 2002Reply With Quote
Atkinson
one of us
posted Hide Post
Lot of presses are too short for double rifle cases and 50 cal MG. RCBS A-2 will handle everything short of 20MM cannon cases!v rotflmo


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42225 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia