THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
375 ?
 Login/Join
 
blackbearhunter
one of us
posted
What is the recommended start load with H4895 with the nosler 260gr. in 375H&H?I dont own a nosler book...yet.Thanks in advance! thumb
 
Posts: 3608 | Location: USA | Registered: 08 September 2004Reply With Quote
Jeff Sullivan
One of Us
Picture of Jeff Sullivan
posted Hide Post
H4895 is not even a powder choice for the 260 gr bullet, but it is for the 300 gr. The powder that gave the best accuracy was the RL 15.






 
Posts: 1229 | Location: Texas | Registered: 08 November 2005Reply With Quote
BigBullet
one of us
Picture of BigBullet
posted Hide Post
BBH,

I concur with Jeff Sullivan here, my favorite loaad with 260gr Accuabond is 70.5gr Reloader 15. This gives a velocity of 2590 fps from my 24" barreled rifle and is amazingly accurate.

BigBullet


BigBullet

"Half the FUN of the travel is the esthetic of LOSTNESS" Ray Bradbury
https://www.facebook.com/Natal...443607135825/?ref=hl
 
Posts: 1224 | Location: Lorraine, NY New York's little piece of frozen tundra | Registered: 05 July 2003Reply With Quote
vapodog
One of Us
Picture of vapodog
posted Hide Post
The answer is found here.

The data is for 270 grain but the 260 can be used with 68 grains as well...work up the same as always.

I'd start the 260 grain at about 64 grains.

You don't need Nosler data to shoot Nosler bullets.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
blackbearhunter
one of us
posted Hide Post
Thanks everyone! thumb
 
Posts: 3608 | Location: USA | Registered: 08 September 2004Reply With Quote
ricciardelli
one of us
Picture of ricciardelli
posted Hide Post
H-4895 From 58.6 grains to 73.9 grains
Remington 9-1/2M Primer

But it is not my powder of choice.

I liked:
IMR-4064 From 61.2 grains to 73.4 grains
Remington 9-1/2M Primer


http://stevespages.com
 
Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002Reply With Quote
blackbearhunter
one of us
posted Hide Post
Thanks Steve!I will try some IMR Powder! thumb
What speed should i get with the starting charge?I will try the hornady 270gr,sp as well.. WinkThis is gonna be FUN! animal
 
Posts: 3608 | Location: USA | Registered: 08 September 2004Reply With Quote
butchloc
One of Us
posted Hide Post
4350 is the classic 375 powder
 
Posts: 13465 | Location: faribault mn | Registered: 16 November 2004Reply With Quote
308Sako
One of Us
Picture of 308Sako
posted Hide Post
IMR 4064 has the accuracy edge in my Sako Safari, Win 760 and IMR 4350 not far behind.






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
 
Posts: 3611 | Location: LV NV | Registered: 22 October 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia