15 February 2006, 02:11
blackbearhunter375 ?
What is the recommended start load with H4895 with the nosler 260gr. in 375H&H?I dont own a nosler book...yet.Thanks in advance!

15 February 2006, 02:40
Jeff SullivanH4895 is not even a powder choice for the 260 gr bullet, but it is for the 300 gr. The powder that gave the best accuracy was the RL 15.
15 February 2006, 02:52
BigBulletBBH,
I concur with Jeff Sullivan here, my favorite loaad with 260gr Accuabond is 70.5gr Reloader 15. This gives a velocity of 2590 fps from my 24" barreled rifle and is amazingly accurate.
BigBullet
15 February 2006, 03:53
vapodogThe answer is found
here.The data is for 270 grain but the 260 can be used with 68 grains as well...work up the same as always.
I'd start the 260 grain at about 64 grains.
You don't need Nosler data to shoot Nosler bullets.
15 February 2006, 05:44
ricciardelliH-4895 From 58.6 grains to 73.9 grains
Remington 9-1/2M Primer
But it is not my powder of choice.
I liked:
IMR-4064 From 61.2 grains to 73.4 grains
Remington 9-1/2M Primer
15 February 2006, 22:04
blackbearhunterThanks Steve!I will try some IMR Powder!

What speed should i get with the starting charge?I will try the hornady 270gr,sp as well..

This is gonna be FUN!

16 February 2006, 00:32
butchloc4350 is the classic 375 powder
16 February 2006, 05:36
308SakoIMR 4064 has the accuracy edge in my Sako Safari, Win 760 and IMR 4350 not far behind.
Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.