The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading RCBS LUBE DIE, buy or not to buy?Go | New | Find | Notify | Tools | Reply | |
| RCBS LUBE DIE, buy or not to buy? | Login/Join |
One of Us |
I was wondering if anyone uses the RCBS LUBE DIE? If so is it worth the investment? Or should I just keep rolling on my lube pad? What other kinda choices are there out there to use? The fallowing link is to RCBS site where looking at the die #2 RCBS LUBE DIE#2 Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | ||
|
| One of Us |
I don't care for that die. While necks need very little lube (bottle neck cases), they do need some and the lube die sorta misses that area. I quit using a lube pad some 45 years ago, shortly after I started loading. It just collected too much grit, dust, etc. For the next many years, I tipped my fingers in a spot of case lube and rubbed the lube on each case as I picked it up. Now I use one of the waxes. They all work, Imperial, Unique, Kiwi Neutral shoe wax, "Mink Oil" and "Snow-Proff" boot treatments. (Even "Chapstick" but it's really too hard - and expensive - to use easily as a case lube!) The various waxes work very good, easy to apply, no lube dents, it's clean and easy to wipe off afterwards. It's much better than any lube pad, or an exensive spray, for me. | |||
|
| one of us |
I tried the lube die years ago when they first came out. Didn't have much luck with it though. I couldn't get the right amount of lube on the case, either too much or not enough. I can roll a half dozen or so across the lube pad faster. I clean my brass prior to lubing and either roll them across a lube pad or sometimes I use the spray on. I keep an old loading tray just for spray lubing. Hope this helps. Paul. | |||
|
| One of Us |
Thanks guys! I have a bunch of the kiwi neutral wax from when I was in the army to clean my boots before polishing and something to make shine better after. So I will try that, Sounds much easier then the rest of the methods, best part is it will not get everywhere and collect dust. Man the times I v had to clean my equipment because of it picking up dirt. Guess that's what I get for using a old horse stall in a old barn as my shop. Any heating ideas? Just kidding its temp till I buy my new place. Thanks and Best of Luck to you Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | |||
|
| One of Us |
OK I know its been a little while and I hope JimC will reply. I was looking at my can of saddle soap. It is made with wax, do you think that will work? Or do you think I'd be better off going and getting the clear boot wax? Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | |||
|
| one of us |
i haven't used one so don't take my word for it, but it looks like a solution for a problem that doesn't exist.
this is exactly what lee advises. | |||
|
| One of Us |
When the lube die was first described I figured it would not do much for the neck on a bottle necked case. I just apply Imperial with my fingers. This is one part of the process that I long ago quit thinking about. | |||
|
One of Us |
Frying pan, spray in some synthetic spray lube from Amzoil or equivalent.. hang pan on edge of bench with a rug or rag underneath so the excess drains off... use a bore brush on a pistol cleaning rod to lube case necks... tumble cases afterwards to remove lube, or can even just rub them down a little with a shop rag, that works good enough... those type of lubes from RCBS etc, are a real pain to work with and a real mess... Life Member: The American Vast Right Wing Conspiracy Jan 20, 2009.. Prisoner in Dumocrat 'Occupied America', Partisan in the 'Save America' Underground Beavis..... James Beavis..... Of Her Majesty's Secret Service..... Spell Check Division "Posterity — you will never know how much it has cost my generation to preserve your freedom. I hope you will make good use of it." John Quincy Adams A reporter did a human-interest piece on the Texas Rangers. The reporter recognized the Colt Model 1911 the Ranger was carrying and asked him "Why do you carry a 45?" The Ranger responded, "Because they don't make a 46." Duhboy....Nuttier than Squirrel Poop... | |||
|
| One of Us |
I just like the idea of the boot wax because I have a shit load of it from when I got of the army 6 years ago. I m not looking to use the black kiwi but the saddle soap, which dose have the wax in it. I still use quite a bit of it to keep my boots from falling apart on me. So If I can find something the doubles its use I d be all over it. To me it seems that it would be hell of a lot easier to clean off the case and maybe help keep the tarnish at bay too. So that there gives it 3 uses. Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | |||
|
| One of Us |
James, I was thinking saddle soap when you were saying "shoe polish." Never heard of anyone trying that one. If you have a stuck case puller, you might try it and let us know if it works. Otherwise, I'd suggest trying the Mink Oil. It'll waterproof your boots where the saddle soap won't. I've heard of Crisco being used. You can size your brass while baking cornbread (a Southern delicacy, buy not so far south that 303Guy would know of it.) Kangaroo Krap? ________________________ "Every country has the government it deserves." - Joseph de Maistre | |||
|
| one of us |
I use midway spray lube haven't rolled a case in years and have loaded thousands of rounds. Spray lube works great. | |||
|
One of Us |
I used spray lube too...Lyman and liked it a lot.....I still use some but Roger convinced me that Imperial die wax is the way to go......the darn stuff works very good I'm not into rolling on a pad or lube dies at all. been there.....won't go there again. /////////////////////////////////////////////////////////////////////////// "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery." Winston Churchill | |||
|
| One of Us |
Interesting idea, the soap. May work but I haven't tried it...maybe YOU can tell US! Try it. If the case seems to be getting harder to size than normal stop or you WILL have a stuck case! I fully agree with Winchester 69 about the Mink "Oil", it's very good stuff. Can use Kiwi shoe wax in colors too, but messes your fingers up and makes them look like you've been spit shining those boots!  | |||
|
One of Us |
About a month ago I was reforming 2000 cases from 7.62x39 to 6.5 Grendel, usiing Imperial die sizing wax. It was a bit slow so I tried spraying the cases with some Dupont teflon/silicon spray lube and it worked, so I sprayed the whole batch, shook them up and proceeded, much faster with no problems. I did use a NECO case neck moly lube evey 12-15 cases. JJK | |||
|
| One of Us |
quote: I hope JimC will reply. I was looking at my can of saddle soap. It is made with wax, do you think that will work? Or do you think I'd be better off going and getting the clear boot wax? Interesting idea, the soap. May work but I haven't tried it...maybe YOU can tell US! Try it. If the case seems to be getting harder to size than normal stop or you WILL have a stuck case! I fully agree with Winchester 69 about the Mink "Oil", it's very good stuff. Can use Kiwi shoe wax in colors too, but messes your fingers up and makes them look like you've been spit shining those boots! I would think again about saddle soap. It does contain some waxes and oils but also has a soap component which is alkaline and is corrosive to brass and the dies. Consider how a brass fitting in a piece of leather turns green! JJK | |||
|
One of Us |
I have used Hornady spray lube and liked it O.K. and started useing Imperial wax last year and like it also. The pads hold dirt so I dont like them. ________________________________________________ Maker of The Frankenstud Sling Keeper Proudly made in the USA Acepting all forms of payment | |||
|
| One of Us |
i will never use anything but the hornady spray wax, One Shot. it's easy and quick and isn't slimy, no cleanup, no smell. -Matt | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading RCBS LUBE DIE, buy or not to buy?
Visit our on-line store for AR Memorabilia