THE ACCURATERELOADING.COM FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    Neck dia. of loaded .30-06 round using Lapua brass??

Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Neck dia. of loaded .30-06 round using Lapua brass??
 Login/Join
 
<Jordan>
posted
Does anyone know the neck diameter of a loaded .30-06 round using Lapua brass?

Thanks,


Jordan

 
Reply With Quote
ricciardelli
one of us
Picture of ricciardelli
posted Hide Post
The diameter of the bullet plus two-times the thickness of the brass...

 
Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002Reply With Quote
<Jordan>
posted
Right. But I don't have any brass to measure to obtain diameter at the neck.

Jordan

 
Reply With Quote
<AKI>
posted
Jordan. I measured 10 cartridges loaded in virgin brass. Got 8.54mm +-0.005, or .336 +-.0002. AKI
 
Reply With Quote
ricciardelli
one of us
Picture of ricciardelli
posted Hide Post
Standard cartridge dimensons can be found at:

http://stevespages.com/table2.html

 
Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    Neck dia. of loaded .30-06 round using Lapua brass??

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia