The Accurate Reloading Forums
Neck dia. of loaded .30-06 round using Lapua brass??

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/57610545

01 November 2001, 11:57
<Jordan>
Neck dia. of loaded .30-06 round using Lapua brass??
Does anyone know the neck diameter of a loaded .30-06 round using Lapua brass?

Thanks,


Jordan

01 November 2001, 14:42
ricciardelli
The diameter of the bullet plus two-times the thickness of the brass...


01 November 2001, 16:29
<Jordan>
Right. But I don't have any brass to measure to obtain diameter at the neck.

Jordan

02 November 2001, 10:03
<AKI>
Jordan. I measured 10 cartridges loaded in virgin brass. Got 8.54mm +-0.005, or .336 +-.0002. AKI
03 November 2001, 05:18
ricciardelli
Standard cartridge dimensons can be found at:

http://stevespages.com/table2.html