The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Progressive Press wanted :(Go | New | Find | Notify | Tools | Reply | |
| Progressive Press wanted :( | Login/Join |
One of Us |
I just wanted to add after reading and talking on a thread on progressive press'. I just wanted to put it out there if anyone has a used one for a good price let me know. If this is not the right place for this tread please move it to the right one. Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | ||
|
one of us |
Good luck, few good deals are to be had on Dillon or LNL. I did just sell one of my 550B to a buddy for $320 w/ tool heads & other goodies, but tough to find them. IMO, unless you are shooting 200rds a week, you don't really need a progressive. You can load 60-75rds an hour on a single stage if you are organized. With the Lee Class Turret, 120-140rds. So even at 200rds a week, that is less than 3hrs reloading time spent. I used to shoot about 500rds a week, the prgressive was handy, but I still use the ss quite a bit. LIFE IS NOT A SPECTATOR'S SPORT! | |||
|
| One of Us |
I wanted to get it for my 9mm, its a S&W 915. It gobbles up rds like kids with candy. My Ruger revolver in 38spec eats them up a bit more slowly. My M1 & 30carbine eat them just as fast but hardly get as used as much. Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | |||
|
Moderator |
get the LNL - and you'll forget how much it cost after the first 1000 rounds opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| One of Us |
Maybe I ll have to wait until this winter after I finish buying my machine tool equipment Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | |||
|
| one of us |
The LNL is a good machine, equal to the Dillon 650 in speed & quality. If I didn't have blue I would probably go this route. For a couple 100 rds a week, a Lee Classic Turret would fill the need quite easily for a lot less money & complication. The 550B is manual indexing but very simple to setup & use & keep running. LIFE IS NOT A SPECTATOR'S SPORT! | |||
|
| One of Us |
Well I deffenently wont buy a lee. I also notice that no one talks about RCBS much. Well guys this is why I asked for help, I cannot afford anything new right now and was hoping someone was looking to get rid of there old one or somewhere there about.  Disabled Vet(non-combat) - US Army NRA LIFE MEMBER Hunter, trapper, machinest, gamer, angler, and all around do it your selfer. Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight..... | |||
|
Moderator |
Keep checking here periodically: http://maine.craigslist.org/se...atAbb=spo&srchType=A for every hour in front of the computer you should have 3 hours outside | |||
|
| one of us |
The LNL is a great press. If you have a LNL Classic, they can be calibrated together, ala ultimatereloader.com. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia