THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Re: Case neck turning
 Login/Join
 
one of us
posted
My vote would go to the K&M neck turning tool.

It's a good tool; easy to use; easy to calibrate. The tool can be fitted with guages thus, it can be as every bit sophisticated as the Sinclair tool. Sinclair makes good tools also.

In addition, Ken Markel (K&M) is about as nice a guy as you'll ever talk to.

Good luck.
 
Posts: 1323 | Location: San Antonio, Texas | Registered: 04 March 2003Reply With Quote
one of us
Picture of worriedman
posted Hide Post
Which is the best tool for turning case necks?
 
Posts: 742 | Location: West Tennessee | Registered: 27 April 2004Reply With Quote
one of us
posted Hide Post
Quote:

My vote would go to the K&M neck turning tool.

It's a good tool; easy to use; easy to calibrate. The tool can be fitted with guages thus, it can be as every bit sophisticated as the Sinclair tool. Sinclair makes good tools also.

In addition, Ken Markel (K&M) is about as nice a guy as you'll ever talk to.

Good luck.




K&M products are great!!...sakofan..Get the chamfer tool while your at it, friend.
 
Posts: 1379 | Location: North Carolina | Registered: 11 March 2003Reply With Quote
one of us
posted Hide Post
I third the nomination of the K&M tool.
 
Posts: 1496 | Location: behind the crosshairs | Registered: 01 August 2002Reply With Quote
one of us
Picture of worriedman
posted Hide Post
I do apprecitae the info, and you were also correct with refernce to Mr. Markel, he spent nearly 45 minutes helping me understand the reasoning behind his equipment, was very helpful.
 
Posts: 742 | Location: West Tennessee | Registered: 27 April 2004Reply With Quote
one of us
posted Hide Post
Another vote for K&M. I really like mine.
 
Posts: 407 | Location: Olive Branch, MS | Registered: 31 December 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia