The Accurate Reloading Forums
Re: Case neck turning

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/552101131

27 April 2004, 11:29
30 Caliber Mag Fan
Re: Case neck turning
My vote would go to the K&M neck turning tool.

It's a good tool; easy to use; easy to calibrate. The tool can be fitted with guages thus, it can be as every bit sophisticated as the Sinclair tool. Sinclair makes good tools also.

In addition, Ken Markel (K&M) is about as nice a guy as you'll ever talk to.

Good luck.
27 April 2004, 11:10
worriedman
Which is the best tool for turning case necks?
27 April 2004, 11:50
sakofan
Quote:

My vote would go to the K&M neck turning tool.

It's a good tool; easy to use; easy to calibrate. The tool can be fitted with guages thus, it can be as every bit sophisticated as the Sinclair tool. Sinclair makes good tools also.

In addition, Ken Markel (K&M) is about as nice a guy as you'll ever talk to.

Good luck.



K&M products are great!!...sakofan..Get the chamfer tool while your at it, friend.
27 April 2004, 17:35
JustC
I third the nomination of the K&M tool.
01 May 2004, 08:13
worriedman
I do apprecitae the info, and you were also correct with refernce to Mr. Markel, he spent nearly 45 minutes helping me understand the reasoning behind his equipment, was very helpful.
01 May 2004, 10:50
DeltaHunter
Another vote for K&M. I really like mine.