THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Bullets and Powder for 7mm Rem Mag and 7mm-08
 Login/Join
 
One of Us
posted
Just starting to reload for my rifles. Hoping I can avoid having to by different powders and bullets to start, is there a 140gr. bullet and powder combination that will work well in both calibers? If not, I am starting with the 7 mag and would like suggestions on a good load for whitetail deer and pigs.

Thanks in advance
 
Posts: 28 | Location: rockwall, texas | Registered: 08 September 2008Reply With Quote
One of Us
Picture of Concho42
posted Hide Post
7mmMag/IMR4350/61gr 140 gr boattails Fed 215 Mag primers , set bullet to touch rifling about .010 smoke bullet and see marks I have a 98 mauser 26"bbl target crown 6.5x20 leupold will shoot dimes all day at 200 yds ,I laped my aaction and chambered as close to zero head space as possible !Start with a lower powder charge to see how your gun does mike your brass before and after shooting for expansion !Good luck


Don't take the chip !
 
Posts: 578 | Location: PA | Registered: 21 March 2007Reply With Quote
One of Us
posted Hide Post
I have never loaded for a 7RemMag. The 708 should work well with IMR4064 and Hornady 139 Interlock bullet, as this made a one ragged hole shooter out of my daughter's Rem. Model 7.


Dennis
Life member NRA
 
Posts: 1191 | Location: Ft. Morgan, CO | Registered: 15 April 2005Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
I have both and load the 7-08 with 140's and the 7 Rem Mag with 160's and use R22 or H4831SC in the mag....Varget and IMR4350 in the 7-08.....But IMR4350 will work in both very good.


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
posted Hide Post
Thanks
 
Posts: 28 | Location: rockwall, texas | Registered: 08 September 2008Reply With Quote
one of us
posted Hide Post
that is hard to do. i have shot both, but if you need one powder it would be 4350.. both shooting the 140s.. i dont shoot this powder in either one. i like RL-15 IN MY 7-08, and IMR-4831 TO RL-22 IN THE 7MM-REM MAG.. 4350 has a max load of 46.0 at 95% density in the 7-08 with the 140..the 7mm-rem mag.. has a max load of 65grs.4350 . at 83% density
 
Posts: 1137 | Location: SouthCarolina | Registered: 07 July 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia