The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Case Trimmer For 600 and 700 Calibers??Go | New | Find | Notify | Tools | Reply | |
| Case Trimmer For 600 and 700 Calibers?? | Login/Join |
| Administrator |
Anyone knows of any case trimmer for these larger calibers? We have been using the Wilson trimmer for all our work, but that stops at 50. Any help would be greatly appreciated it. | ||
|
| One of Us |
Make a Wilson type case holder for each round and use it in a engine lathe with a 1" 5C collet holder. If you do not want to make the holder Wilson will custom make them. The small Hardinge machines with the lever operated cross slide are excellent for case modification. The cut off tool is shown in operation right at the end of the video. Hardinge Video | |||
|
| Administrator |
I am already doing them on the lathe, as I have made holders for all the calibers I need. But, I was wondering if there was a stand alone trimmer available for these large calibers. | |||
|
| One of Us |
Saeed, I answered on the other post you queried but will again. RCBS and Forster both make a trimmer that will trim up to the .50 BMG, it's long enough to do what you want but I don't know if they make the cutter heads big enough in diameter for your applications. I bet they could make them custom ordered. | |||
|
One of Us |
I think a lot of people use custom trim dies. RCBS makes them for any caliber they make regular dies for I believe. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ J. Lane Easter, DVM A born Texan has instilled in his system a mind-set of no retreat or no surrender. I wish everyone the world over had the dominating spirit that motivates Texans.– Billy Clayton, Speaker of the Texas House No state commands such fierce pride and loyalty. Lesser mortals are pitied for their misfortune in not being born in Texas.— Queen Elizabeth II on her visit to Texas in May, 1991. | |||
|
Moderator |
mini chop saw .. i made a tailstock for mine to set length opinions vary band of bubbas and STC hunting Club Information on Ammoguide about the416AR, 458AR, 470AR, 500AR What is an AR round? Case Drawings 416-458-470AR and 500AR. 476AR, http://www.weaponsmith.com | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Case Trimmer For 600 and 700 Calibers??
Visit our on-line store for AR Memorabilia