The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Cleaning BrassGo | New | Find | Notify | Tools | Reply | |
| Cleaning Brass | Login/Join |
One of Us |
I got a 35 gallon drum full of 308 brass gave to me....YeHaaa. Its military and its old and dirty. It is taking 5 to 8 hours to clean this stuff in my Lyman 1200 tumbler and thats using a few ounces of Dillon Brass Polish per load. I want to sell this stuff on Ebay but I have to get it clean first. Do any of you folks know a way I can cut down on my tumbler run time? Iknowmyspellingsucks! Following and duplicating a successful persons actions is worth ten thousand hard headed mistakes | ||
|
One of Us |
Add a little Comet or Ajax type of powder cleaner to the tumbler.(by little I mean LITTLE) ______________________ Smedley  ______________________ From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.' B.H.Obullshitter ------------------------------------ "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill ------------------------------------ "..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams ------------------------------------ Facts are immaterial to liberals. Twisted perceptions however are invaluable. ------------------------------------ We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please. | |||
|
| one of us |
Ultrasonic cleaner. The commercial guys also use larger tumblers with detergent and a dash of phosphoric acid. they use three cycles. With your present equipment, there is no fast way. Just enjoy the process; It will be a long one. LD  | |||
|
| One of Us |
Wash the brass with cascade automatic dishwasher detergent. I use the RCBS Sidewinder. Not sure if your Lyman can be used with water. | |||
|
One of Us |
I've used this formula offered by bob338
Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | |||
|
| One of Us |
Hey, thanks Rusty. It works great. Following and duplicating a successful persons actions is worth ten thousand hard headed mistakes | |||
|
| one of us |
Bye the bye, Some of that brass has probably been through a machine gun. You won't be wanting to re-use those particular cases. A case gage will save you a lot of heartache. If the headspace has been increased .010" or more over nominal, it is a good bet that the case has been through an M-60 or an M-240. Have good fun with it all. LD | |||
|
| One of Us |
You are so right, however dies are made for 308 and 3006 that have been fired in military fast guns to put them back in specs. Midway has them. Following and duplicating a successful persons actions is worth ten thousand hard headed mistakes | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia