THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Neck turning
 Login/Join
 
FlyingAce
One of Us
Picture of FlyingAce
posted
Does anybody know where I can get a neck turning apparatus for my drill press?


Jim Mace

For all things WSSM...
http://wssmzone.com

Some told me, "Jim, sorry, you just can't...". To those I reply, "Watch Me..."
 
Posts: 84 | Location: Spokane, Washington | Registered: 10 November 2004Reply With Quote
b beyer
One of Us
posted Hide Post
A lot of the tools that use a double ended mandrel can be used in a drill press by chucking the opposite end of the mandrel in the press. I have found it quite difficult to get as good results in a press or miller as I do by hand. Bob


Bob
 
Posts: 529 | Location: Harrison, Maine - Pensacola, Fl. | Registered: 18 January 2005Reply With Quote
Kory
one of us
Picture of Kory
posted Hide Post
quote:
Originally posted by b beyer:
A lot of the tools that use a double ended mandrel can be used in a drill press by chucking the opposite end of the mandrel in the press. I have found it quite difficult to get as good results in a press or miller as I do by hand. Bob


Same here, but I've had good results using a power screw driver and the K&M neck turning setup. I know people who do it on a mill and get great results, but not me.

Kory
 
Posts: 860 | Location: Montana | Registered: 16 August 2004Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia