The Accurate Reloading Forums
Neck turning

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/501101352

19 April 2005, 22:25
FlyingAce
Neck turning
Does anybody know where I can get a neck turning apparatus for my drill press?


Jim Mace

For all things WSSM...
http://wssmzone.com

Some told me, "Jim, sorry, you just can't...". To those I reply, "Watch Me..."
19 April 2005, 23:48
b beyer
A lot of the tools that use a double ended mandrel can be used in a drill press by chucking the opposite end of the mandrel in the press. I have found it quite difficult to get as good results in a press or miller as I do by hand. Bob


Bob
20 April 2005, 00:04
Kory
quote:
Originally posted by b beyer:
A lot of the tools that use a double ended mandrel can be used in a drill press by chucking the opposite end of the mandrel in the press. I have found it quite difficult to get as good results in a press or miller as I do by hand. Bob


Same here, but I've had good results using a power screw driver and the K&M neck turning setup. I know people who do it on a mill and get great results, but not me.

Kory