Reloading .375 CEB's for .375 H&H

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/4891045281

27 November 2012, 22:55

Edod

Reloading .375 CEB's for .375 H&H

Does anyone have any reloading data for the .375 300 GR. Brass Solid and the .375 275 GR. Brass Non Con Hollow Point from CEB? Would prefer to use either Reloader 15, IMR 4350 or IMR 4895 if possible (have a lot of those powders). Hope to use those bullets in my .375 H&H on a cape buffalo this coming spring and wanted to start working up a load.

27 November 2012, 23:36

Mike Brooks

Look at threads by Michael458 up in the big bore area. He'll know.

NRA Life
ASSRA Life
DRSS

Today's Quote:
Give a man a fish and he eats for a day. Give a man a welfare check, a free cell phone with free monthly minutes, food stamps, section 8 housing, a forty ounce malt liquor, a crack pipe and some Air Jordan's and he votes Democrat for a lifetime.

27 November 2012, 23:54

boom stick

Might want to call CEB but seems Michael is using similar loads for same weight in TSX bullets.

577 BME 3"500 KILL ALL 358 GREMLIN 404-375

*we band of 45-70ers* (Founder)
Single Shot Shooters Society S.S.S.S. (Founder)

02 December 2012, 18:28

Edod

Thanks for the suggestion on Michael458's thread. Have also contacted CEB and they were quite helpful. I ordered the new 3 petal Non Con's as well as the solids and they said they should be sending them out in a couple of weeks.