The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Finally found my reloading bench…..Go | New | Find | Notify | Tools | Reply | |
| Finally found my reloading bench….. | Login/Join |
| One of Us |
Was buried in my parent's garage, I'm gonna go with a Black & Decker Workmate work bench. Just thought I'd put the press and powder measure on to see what it would look like without any modifications. If anyone has pics of their Black & Decker work benches or have any recommended modifications please share them! Thanks!     | ||
|
One of Us |
Been using one for years! Mounted a 2x16 to the top. Plenty strong! What took ya so long?  Rusty We Band of Brothers! DRSS, NRA & SCI Life Member "I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends." ----- David Crockett in his last letter (to his children), January 9th, 1836 "I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841 "for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.” | |||
|
| One of Us |
I used one for sa long time. Mounted a piece of laminated benchtop on it (cut from the hole for double sink) and bolted on with timber plate under worktop, seemed stronger that way.Then mounted press etc to that. Worked fine. Still have it. Another advantage of removable top is can remove it and fold the workmate out of the way. Cheers, Chris DRSS | |||
|
One of Us |
 Truly amazed at the acclamation of its strength !  rogerOld age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone.. | |||
|
One of Us |
I used the Workmate for years as a primary and a portable loading bench. Spread the jaws out as far as they can go and cut a piece of ¾ AC plywood to that total dimension, then bolt it to the jaws. Makes a very strong loading bench with a usable top. | |||
|
| one of us |
Also used a workmate for a reloading bench a few years back. cut a 3/4 inch plywood top with a 2x6 screwed underneath to clamp into the jaws. Mounted my press on one end (not side) and stacked two 25 pound dumbells on the other end to counter the force applied to the press handle. Much stiffer than mounting the press from the side. Worked well. | |||
|
One of Us |
I don't have a press mounted on my "workmate" (cheap knock off of the B&D). I have my trimmers and Dillon deswager mounted on 2x 6 blocks and put the tool I am using on it using the blocks to lock it in place. I have a press mounted on a box to use as a tabltop press and have clamped it on top also. A bad day at the range is better than a good day at work. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Finally found my reloading bench…..
Visit our on-line store for AR Memorabilia