THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
.223 loads with stick powder
 Login/Join
 
one of us
Picture of hivelosity
posted
I'm looking for a load for a 223 savage axis using 62gr FMJ-BT Hornady Bullets.
Probably try the loads in an AR .223/5.56 as well.
any one tried imr3031, imr4064 or IMR4895. what were your results good or bad.
info appreciated
Thanks Dave
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
One of Us
posted Hide Post
IMR 4895 in 5.56/223 w/ heavies will be your best option of your 3 listed powders in a bolt gun.


Keep'em in the X ring,
DAN

www.accu-tig.com
 
Posts: 430 | Location: Fairbanks,AK. | Registered: 30 October 2008Reply With Quote
One of Us
posted Hide Post
Got Varget ?
 
Posts: 857 | Location: South Pacific NW | Registered: 09 January 2021Reply With Quote
One of Us
posted Hide Post
used all three.
one of my PET heavy barrel target loads is with 4895 and the Sierra 52gr. hollow point.
 
Posts: 5005 | Location: soda springs,id | Registered: 02 April 2008Reply With Quote
one of us
posted Hide Post
Have use all three I prefer a good ball powder over them.

Just because a ball powder meters so much nicer.
 
Posts: 19835 | Location: wis | Registered: 21 April 2001Reply With Quote
one of us
Picture of hivelosity
posted Hide Post
Thanks for the comments.
Ball powders are hard to come by around here and sold out on the net.
SO i have this surplus of stick powders that I don't use much.
I picked up a Lyman Gen 6 powder dispenser a while back and it does a real good job on weighing stick powders.
one of my go to powders is H414 and I read on Hodgons site that they have discontinued it in 2020.
Thanks Dave
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
One of Us
posted Hide Post
H414 = Winchester 760.
 
Posts: 857 | Location: South Pacific NW | Registered: 09 January 2021Reply With Quote
one of us
Picture of hivelosity
posted Hide Post
760 is out of stock as well.
I think I will try Imr 4198 I have a good supply of it. Even have a 2# supply of old stock.
62 gr hornady fmj 18 to 20 grs imr 4198. Federal cases.
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by hivelosity:
760 is out of stock as well.
I think I will try Imr 4198 I have a good supply of it. Even have a 2# supply of old stock.
62 gr hornady fmj 18 to 20 grs imr 4198. Federal cases.


You werent kidding about it being old stock. lol
 
Posts: 201 | Location: Florida, USA | Registered: 22 January 2012Reply With Quote
one of us
posted Hide Post
4198 is a super accurate powder, but a tad short on velocity in most cases, but in t he 223 I think its right up there in velocity..

I use H335 and H322 in the 223, 222, and 6x45 almost exclusively..but that stuffs hard to come by.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42309 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
one of us
Picture of hivelosity
posted Hide Post
thanks Ray, I have loaded some test rounds using the Imr 4198 and imr 3031 55gr bullets and 62gr.
Ill get out and shoot them next week
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
One of Us
posted Hide Post
I liked IMR 4198 too, and still have some from long ago. When I couldn't get any more (several years ago) I changed to LT-32 for both my .223s and my AR. It works very well and the kernels meter better than IMR 4198.
 
Posts: 939 | Location: Grants Pass, OR | Registered: 24 September 2012Reply With Quote
one of us
posted Hide Post
Either of the 4198 powders, H or IMR with a 55gr. or lighter bullets makes me a really good shot. Scary accurate.

Above 55 gr., either H or IMR of 4895 and 2520 makes me again a really good shot.


Swift, Silent, & Friendly
 
Posts: 426 | Location: Nevada | Registered: 14 July 2003Reply With Quote
one of us
posted Hide Post
I like ball powder as I can dump load with my powder measure with great accuracy..stick powder need each load weighed for the most part..H322, H335, H414, WW760, varget, have worked best for me and created my best accuracy in all 224 caliber varmint rifles..If one must use stick powder then use the shortest stick you can find and/or be prepared to weigh each load is a good idea IMO.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42309 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
I know you asked about stick powders but I just received 10# of Accurate 2230 at a fair price and it has broad application in 5.56 and 308
Don't know if still available but you can take a look-see
 
Posts: 201 | Registered: 30 August 2005Reply With Quote
one of us
posted Hide Post
quote:
Originally posted by p dog shooter:
Have use all three I prefer a good ball powder over them.

Just because a ball powder meters so much nicer.


I agree; last weekend I shot 140 rounds at PDs - sure wouldn't want to load those using a scale. In .223 I find BL-C(2), CFE 223, or H335 all work great.


Don't Ever Book a Hunt with Jeff Blair
http://forums.accuratereloadin...821061151#2821061151

 
Posts: 7583 | Location: Arizona and off grid in CO | Registered: 28 July 2004Reply With Quote
One of Us
Picture of eagle27
posted Hide Post
I load for my son's .223 Ruger AM bolt gun using the Sierra 65gr SBT bullet and 25.5grs AR2206H powder re-labelled as H4895 for the USA market.

The load is 0.2grs over maximum listed by Sierra for their 63gr SMP bullet producing 3100fps MV but works fine in the Ruger at that charge with the slightly heavier 65gr bullet.
The H4895 powder is a fine grained stick powder and meters well.

I haven't bothered to chrony the load in the Ruger as the barrel is chopped to 16" and fitted with a suppressor. Him and his wife have taken a few feral goats and red deer with the little rifle, works well with these heavier bullets.
 
Posts: 3943 | Location: Rolleston, Christchurch, New Zealand | Registered: 03 August 2009Reply With Quote
one of us
posted Hide Post
I remember back in the day of old 4831 and such as 4350 when weighing each charge was the norm, spent more time loading varmint loads than shooting..

I don't have to weigh any powder like 760, DFE223 H414, H380 Balc2 322 and 335..I can load 500 in an evening and thats a good day on the PDog or rockchuck hunt they back on the loading bench..most of these powders fill the case pretty well for a verbal inspection...I like that..


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42309 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
How about some of you guys with the slow 1:12 twist barrels. Twist rate can make a big difference with different bullet weights.
 
Posts: 256 | Location: florida | Registered: 20 April 2012Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia