THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
stoney point threads
 Login/Join
 
<OTTO>
posted
I have a stoney point OAL gauge with modified cartridges. I want to make one for my 6.5-284. What is the thread pitch and size in the rear of the modified cases?

------------------
From my cold, dead hands!
Thanks Chuck!

 
Reply With Quote
<Ben H>
posted
I believe its 5/16 x 36.
 
Reply With Quote
ready_on_the_right
one of us
posted Hide Post
You can also send them one of your fired cases and they'll do it!

they will do it for any caliber!

Mike

------------------
Victory through superior firepower!

 
Posts: 324 | Location: GA, USA | Registered: 20 April 2002Reply With Quote
MR
one of us
posted Hide Post
I had to make my own tap, as I couldn,t find one with 36 tpi.
MR
 
Posts: 58 | Location: ALASKA | Registered: 02 March 2001Reply With Quote
<Sparticus>
posted
J and L supply has those tap's. www.jlindustial.com
 
Reply With Quote
<OTTO>
posted
Yup, that's what they are is 5/16x36. I tried the link left by sparticus, it didn't work.

------------------
From my cold, dead hands!
Thanks Chuck!

 
Reply With Quote
ready_on_the_right
one of us
posted Hide Post
Otto

Try spelling "industrial" correctly it will work then!!

Sparticus had a little typo..

Mike

------------------
Victory through superior firepower!

 
Posts: 324 | Location: GA, USA | Registered: 20 April 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2025 Accuratereloading.com


Visit our on-line store for AR Memorabilia