stoney point threads

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/39210475

14 March 2002, 02:58

<OTTO>

stoney point threads

I have a stoney point OAL gauge with modified cartridges. I want to make one for my 6.5-284. What is the thread pitch and size in the rear of the modified cases?

------------------
From my cold, dead hands!
Thanks Chuck!

14 March 2002, 04:01

<Ben H>

I believe its 5/16 x 36.

14 March 2002, 04:25

ready_on_the_right

You can also send them one of your fired cases and they'll do it!

they will do it for any caliber!

Mike

------------------
Victory through superior firepower!

14 March 2002, 10:36

I had to make my own tap, as I couldn,t find one with 36 tpi.
MR

14 March 2002, 14:28

<Sparticus>

J and L supply has those tap's. www.jlindustial.com

17 March 2002, 05:02

<OTTO>

Yup, that's what they are is 5/16x36. I tried the link left by sparticus, it didn't work.

------------------
From my cold, dead hands!
Thanks Chuck!

17 March 2002, 06:56

ready_on_the_right

Otto

Try spelling "industrial" correctly it will work then!!

Sparticus had a little typo..

Mike

------------------
Victory through superior firepower!