I need some help locating some brass for this cartridge.

Thanks
RNS

Hey RNS
I know that Dieter Horneber can make that brass.
Here are the Co. name ,etc.

Huelsen Horneber
Siegelsdorfer Str. 34
D 90768 Fuerth
Phone 911/7530607 Fax 911/767249
www.huelsen-horneber.de
E-Mail info@huelsen-horneber.de

SWIFT address: BYLADEMM
bank name: Sparkasse Fürth
bank number: BLZ 762 500 00
account number: 242 354

IBAN: DE59 7625 0000 0000 2423 54
SWIFT-BIC: BYLADEM1SFU

Please notice me if you contact with Dieter. If you will order some brass, please add 10 boxes for me.

If you need some more info about the 6x62 Frères, send me a PM. I have a R93 in that caliber and have developed a few reloads.

Regards

RNS
Here are another source:
www.grafs.com/metallic/product/104491

Regards

Thanks for the info

I have QuickLoad and the diagram in that program makes it look like it could be formed from .30-'06. Might check around.

quote:

Originally posted by Geo.:
I have QuickLoad and the diagram in that program makes it look like it could be formed from .30-'06. Might check around.

According to COTW, the 6X62mm Freres case has a larger head diameter than the .30/'06, and "should not be formed from .30/'06 brass".

Yet the given head diameter is .474". Since the '06 is .470", I am not convinced that '06 brass could not be used, particularly a lot that is on the "generous" side. I don't think an unsupported .002" on each side would cause trouble (after fireforming!)

Hey RNS
Is there any notice about your search for 6x62 Frères cases?
Regards

Take Kechutti's advice and try to get Horneber brass. All my experience with Bertram brass has been less than satifactory, ie; 0 quality control on dimensions.

Hey RNS
Is there any notice about your search for 6x62 brass?