THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
6MM REM loads with 55,58 and 65 grain bullets
 Login/Join
 
One of Us
Picture of youngoutdoors
posted
Just wondered if you all had a prefered load for the 6MM REM with 55,58 and 65 grain bullets. Trying to load for my buddies 40X. Thanks and God Bless, Louis
 
Posts: 1381 | Location: Mountains of North Carolina | Registered: 14 January 2008Reply With Quote
One of Us
posted Hide Post
I use 45.0grs of IMR 4350 for 65 VMax's and 68 Berger's.
 
Posts: 8169 | Location: humboldt | Registered: 10 April 2002Reply With Quote
One of Us
Picture of 308Sako
posted Hide Post
My 40X - 6 Remington came with a test target using 60 grain bullets and IMR 4895. I personally like 68 to 75 grain bullets and IMR 4350






Member NRA, SCI- Life #358 28+ years now!
DRSS, double owner-shooter since 1983, O/U .30-06 Browning Continental set.
 
Posts: 3611 | Location: LV NV | Registered: 22 October 2002Reply With Quote
One of Us
posted Hide Post
My 6mm rem loved the 60 gr sierra hp ahead of 36.5 grs of imr 4895...should also work with the bullet weights you listed...

My old rifle had a 1-14 twist..it was great for the lighter bullets but would not stabilize the "heavier" 100 gr slugs at all...

Good luck
 
Posts: 228 | Location: Huson Montana | Registered: 31 January 2008Reply With Quote
One of Us
Picture of youngoutdoors
posted Hide Post
Thanks a bunch guys. Now I have a starting place. God Bless, Louis dancing
 
Posts: 1381 | Location: Mountains of North Carolina | Registered: 14 January 2008Reply With Quote
One of Us
Picture of seafire2
posted Hide Post
After testing 15 different powders for the 6 mm Rem with bullet weights from 55 to 75 grains, for accuracy hands down was a charge of 47.5 grains of H 414...

it also had the highest deviation spread over the chronograph...

but it was also a tack driver, from 100 to 300 yds..the 47.5 grains charge was originally with the 75 grain HP, but I found that it was just as accurate when bullet weight decreased.. so pressure is not an issue with the lighter bullets as the load for the 75 grainer was out of an older load manual..


Life Member: The American Vast Right Wing Conspiracy

Jan 20, 2009.. Prisoner in Dumocrat 'Occupied America', Partisan in the 'Save America' Underground


Beavis..... James Beavis..... Of Her Majesty's Secret Service..... Spell Check Division



"Posterity — you will never know how much it has cost my generation to preserve your freedom. I hope you will make good use of it."
John Quincy Adams

A reporter did a human-interest piece on the Texas Rangers. The reporter recognized the Colt Model 1911 the Ranger was carrying and asked him "Why do you carry a 45?" The Ranger responded, "Because they don't make a 46."

Duhboy....Nuttier than Squirrel Poop...



 
Posts: 9316 | Location: Between Confusion and Lunacy ( Portland OR & San Francisco CA) | Registered: 12 September 2007Reply With Quote
One of Us
posted Hide Post
I loaded 55 grain Nosler Ballistic Tips with W760 for my 244 Rem and got 4099 fps out of the 26" barrel. Groups were about 2" @ 200 yds.
 
Posts: 154 | Location: Texas | Registered: 05 January 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia