THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
140gr Accubond
 Login/Join
 
one of us
posted
Looking for powder/load suggestion for 7mm Rem Mag/140gr Nosler AB.

Any game perfromance info would also be appreciated. Use: Deer & Antelope

Thanks
 
Posts: 130 | Registered: 12 May 2004Reply With Quote
One of Us
Picture of fireball 2
posted Hide Post
Cool i could'nt find the acuubond but i did find the nos 140gr part. go to data.hodgdon.com they have lots of loads. can'thurt. Dave


when in rome, punt
 
Posts: 66 | Location: northern calif. | Registered: 01 February 2007Reply With Quote
one of us
Picture of ramrod340
posted Hide Post
quote:
Looking for powder/load suggestion for 7mm Rem Mag/140gr Nosler AB

Use the same data as the 140BT. I use Rl22. As to bullet perfomance it is the bullet we'll be using in my Wife's 7x57 in Nambia this May. She has taken hogs, deer and elk with it. Works great. I'm using the 160AB.


As usual just my $.02
Paul K
 
Posts: 12881 | Location: Mexico, MO | Registered: 02 April 2001Reply With Quote
One of Us
posted Hide Post
noslers #5 manual likes imr4350, reloader 19,this is useing all their 140 grain bullets they make,however they didn''t make their 140 accubond bullets when they printed this manual,but its safe to use their data for your 140 accubond bullet,when i had my last 7mag i shot more 160s and 168 then 140s but that 140 will do you proud ,regards jjmp
 
Posts: 999 | Location: wisconsin | Registered: 26 April 2005Reply With Quote
one of us
Picture of fredj338
posted Hide Post
H4831sc, RL22 & IMR7828 all give good results.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
one of us
Picture of Reloader
posted Hide Post
quote:
Looking for powder/load suggestion for 7mm Rem Mag/140gr Nosler AB.



I've used this load in several 7RMs:

140 NAB loaded over 68-69 grns of H4831 for 3100-3200 fps depending on rifle. Win or Rem brass and Fed 215GMM primers. Start at 67 and work up checking for pressure signs. The 68-69 grn loads are not maxed in most of the rifles I've tried them in but, may be in yours.

Those loads are great on whitetails.

R22 will probably give slightly better velocity but I have much better luck with R22 while using 150-160 grn bullets for some reason in most of the 7RMs I shoot(when speaking of accuracy and SD figures).

Good Luck

Reloader
 
Posts: 4146 | Location: North Louisiana | Registered: 18 February 2004Reply With Quote
One of Us
posted Hide Post
H4831 is it.


Free men should not be subjected to permits, paperwork and taxation in order to carry any firearm. NRA Benefactor
 
Posts: 1652 | Location: Deer Park, Texas | Registered: 08 June 2005Reply With Quote
one of us
Picture of Rob1SG
posted Hide Post
I love the 140 Accubonds in my 7RM, 25" barrel with RL 22 and a CCI 250 primer chrono'd at 3300 with great brass life. H4831 is another good powder.
 
Posts: 1111 | Location: Edmond,OK | Registered: 14 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia